Jump to content
SAU Community

Recommended Posts

Hi all, just bought a r33 gtst and on the way home I started getting a idle surge hovers around 800-1200 almost stalls sometimes but will regain idle after a few seconds to a min.

Not sure if it has a aftermarket bov that is causing the problem.

Also a rubbery squeaking sound from behind timing cover. Could it be just a tensioner.

Has a gizmo boost controller too wtf how do you work it???

Link to comment
https://www.sau.com.au/forums/topic/431744-just-bought-r33-idle-surging/
Share on other sites

Ok pulled off the AAC valve and it was a bit covered in engine breather gunk.

Took the solinionds off it washed in diesel than cleaned with carby cleaner put back together installed, than went for a drive and it's sweet.

Purrs like a kitten all the time.

Noise behind timing cover has gone but I suspect it's a belt tensioner, geeeeeez $300 for a kit

Seen the gates racing one on eBay a lot cheaper are they a good kit for these engines.

Also noticed a very high pitch squeal from the turbo like a dog whistle, it's only on very light throttle every now and than. Sounds like and old bluebird CA18 turbo sound. Weirdest sounding turbo out there if you ever heard one.

Still hold boost but the pull is not consistent from mid to high revs, only very noticeable. But than again it's got 2 1/2 or 2 3/4 pipe than goes to the rear muffler and reduces to about 2 lol previous owner was defected. Will this all reduce high range power maybe a stupid question to ask.

93 R33 GTS-t do they only come with a tiny front mount?

Edited by Darky82

Noise behind timing cover has gone but I suspect it's a belt tensioner, geeeeeez $300 for a kit

Seen the gates racing one on eBay a lot cheaper are they a good kit for these engines.

93 R33 GTS-t do they only come with a tiny front mount?

No need for a racing (blue) belt unless youre pulling mass power, and theyre noisy. Just go genuine Nissan.

Should be a tiny side mount.

Edited by homsniff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...