Jump to content
SAU Community

Recommended Posts

Hey Guys

I need a new tie rod end/rack end for my stagea

Using epc i get a part number that is the same as 33gtr (no surprise there) which is 4852124U00

Justjap list an r34 rack end as 48521-AA000 which is close, but slightly different

I've also read that 300zx is the same (but found pn: 4852110V06)

And an ebay seller mentioning that n14 pulsar rack ends are the same too

So does anyone know what is actually the same as an r33 gtr rack end?

I purchased R33 GTR ones from supercheap and trimmed the threaded section down. (29cm total length down to ~27.5cm total length) The original ones were about 27cm

Better to have plenty of threaded rod going into the outer tie rod. Other skyline rack ties are too short, you risk insufficient thread holding the tie rod ends on. Needless to say, if they stripped out while driving you'd have a bad day....

The only reference number I can find for supercheap auto is RE752. They were about $70 for the pair.

Only modification needed is adding some heat shrink to the shaft of the tie rod so the dust boots hold on more tightly.

makes sense

that'll be r32 gtr ones then

tie rod ends listed for 33R are actually r32 gtr and are different, been through that saga already :unsure:

Would be handy to get some that don't need trimming, but looks like not many options for that tho

I might go into my local parts guy with that length info and see what he can dig up (he's pretty old school and can actually find a part without needing to know the exact car it came off)

Dont know if there is any difference between S1 and S2 stagea, but the part number I got from nissan was 48521 23 U25

It was $137....that may be only 1 tie rod.

Id recommend the GTR ones anyhow. Trimming and filing takes 15 mins.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...