Jump to content
SAU Community

Garrett A/r 60 M24 1-1

Rbvl

By Rbvl,
in RB30 conversions

 Share

Recommended Posts

Rbvl Apprentice

Rbvl

Posted
Posted

Hi fellas I id'd the turbo on my rb25 and it is a garrett ar60 m24 1-1. I believe it's from a s14 or s15 and it is apparently hi flowed. What is the max boost I should run and if it is any good for making half decent power I am putting on an aftermarket plenum on z32 afm bigger injectors new Bosch 044 fuel pump and nistune ecu. Just wanting to know what sort of power it would make at what boost? Would a gt30 make much more power?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 awd issue

      By joshuaho96 · Posted

      https://www.instagram.com/p/C6pukBHrOKB/?img_index=1 Has someone f**ked with the jam nut on the failsafe solenoid? Stuff like this is never supposed to be touched, if it does the transfer case can lock up solid and never bleed properly. Nobody knows what the correct setting is for stuff like that from the factory.
    • C35laurel
      RB25DET NEO refrigerant pressure sensor

      By C35laurel · Posted

      Hey guys just wondering if I can get some clarification on this refrigerant pressure sensor wiring. I bought a 3 pin pigtail to wire in a refrigerant pressure sensor and I just want to make sure I'm reading the schematic and connecting it properly. My ECU doesn't have anything in pin 57 so I put a pin in and ran it to the WHITE wire on the pigtail. Then pin 48 to the BLUE wire and connected the GREEN wire to ground. After doing this I went for a drive and my CEL came on. The car also had jumpy acceleration. Since pin 48 is also the power source for the throttle position sensor I'm wondering if I messed up or reversed the wiring somehow. Any help is appreciated, thanks!
    • WMDC35
      1993 TH1 Blue R32 Skyline GTR VSpec

      By WMDC35 · Posted

      Nismo short shifter is just the lever.
    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      Inside and outside ESCON Field in Sapporo in Hokkaido
    • 13btLUCE
      R34 awd issue

      By 13btLUCE · Posted

      Gday gents, been having a issue for a little while now and have come for some advice. car is a r34 gt-four (awd na sedan), when taking tight corners such as car parks and roundabouts feels as if the diff is locked on both ends, have literally snapped 3 shafts and issues doing my head in. Car has 60k klm so mechanical failure in the diff is unlikely but possible, been to 2 very reputable shops near where I live and both have had no luck. What would be my process of trying to find the cause? not too interested in pulling apart transfer cases just to find nothing, have these cars come out with electronic BS that might cause this? not too mechanically inclined so any information will probably be passed on an expert thanks in advance 
×
×
  • Create New...