Jump to content
SAU Community

Recommended Posts

Gday lads,

Have no problem bulking up :) However, chasing some personal experiences and advice from you guys. Want to know what has and hasn't worked well for you guys to lose those last few kgs of abdomen fat. Can read cardio/diet all day but that is such a broad reply!

What I am after specifically is the following:

- Types of cardio you found worked the best - include duration, intensity, frequency etc

- Meals you found helped keep size whilst helping you become leaner, were they simple to make and cals etc.

- Supplements you found helped

- Things not to do

- Did you change your resistance training? If so why, what exercises were substituted with what?

Just after personal experiences NOT generic info :)

Cheers,

Shaun

Link to comment
https://www.sau.com.au/forums/topic/433342-need-some-advice/
Share on other sites

High protein, high carb diet with minimal fats and sugary foods.

Volume training with heavy weights for calorie burning.

That keeps me around 10-12% bf

If I wanted to chase lower I would probably reduce my carbs and return to HIIT sprinting...but my workouts suffer and I feel lethargic as hell during them, if I do this.

I know you don't want broad replies, but it really is a pretty simple equation of calories in and calories out. Eat clean, train harder. Fat is a product of excess calories and your body can't store fat if you're burning through more calories than you're getting. Hence anorexics do no exercise and look like a bag of bones; their caloric intake is at a deficit to movements in daily life.

Where some people go wrong with this principle, is thinking that they can live off fatty foods and sugary shit, as long as they are on a calorie deficit. Why this doesn't work: they spend their deficit calories on foods that don't support strength and muscle maintenance / growth. They will feel like shit and be unable to burn the same calories in the gym like they were previously, meaning they have to be on even more of a deficit to lose weight - vicious cycle. People also forget to count their regular Saturday night drinking session as a reason why they have an extra 3kg of body fat. A mate of mine stopped drinking on Friday and Saturday nights, lost ~7-8kg from that alone over several weeks.

The best way to diet, IMO, is with consistency. It may be boring, but if you eat the same foods everyday, you will be able to monitor your body much easier and you don't even have to count calories. Many aren't prepared to do this or don't have a lifestyle that can support it, but you are removing the food variable from the equation, so you will notice what changes to your exercise routine impact your body; what cardio does for your body fat. I eat basically the same foods everyday and my weight is never outside of a 1kg range...usually coming down to variance in water intake. It's not really even a diet, it is now just part of my daily routine and I love it. Doing this, I can have a whole day of eating fast food and not see a kg of it go to my stomach, because as soon as I return to my routine, the calories stabilise again.

Some simple, protein rich foods I love:

Tuna and cheese toasted sandwiches

Omelettes full of chicken and ham

Milk

Chicken fillets

Pasta with lots of meat

Cheese and Vegemite on toast

Practically live off those. They do have fat in them, but much more carbs and protein.

As for fat burning cardio:

Sprinting up hills (HIIT)

Basketball

But you don't need cardio to get to low body fat. If you are lifting weights properly at the gym, you will only need to modify your diet.

Whey protein is also a good supplement to have while on a deficit. Contributes the most protein for the least calories due to little carbs or fat.

Killer posts mate. My diet is pretty basic. Will give a brief layout without getting technical with calories etc.

- Water and only water unless - mixing with protein powder or pre-workout (my day's get pretty hectic and I find it doesn't increase my workout capacity but helps keep me enthused and focused when training alone)

- Wholemeal roll (smoko and lunch) chicken and salad etc. Basic, easy to go get, cbf cooking atm and preparing meals but I will get onto that this week.

- 2 bananas between meals

- Dinner usually consists of either 2 x Chicken breasts or 2 x Steaks both with veggies. Throw in brown rice every now and then but that sh*t takes AGES to cook haha.

- 2 Protein shakes daily - one in morning on way to work and the other 30mins before workout. May increase it to 3 if needed but at this stage I don't think so.

- Drink between 3-4L/day of water

Will keep at it, throwing in the cardio and I should get the desired results. The previous problems I have found are I can lose weight no problem but I lose muscle mass. Which is NOT the result I want so will keep sticking at this and see how I go.

I'm avoiding cheeses, white breads, sauces, salts, soft drink, alcohol in general (but if I go out I usually only drink vodka, soda and fresh lime anyway as a healthier alternative than beer or sugary mixers) I just want to play it safe and see just what results I can achieve like this. My greatest concern is losing size!!!

What are you having for breakfast?

Have you only just started this diet?

Have heard that protein is best consumed straight after a workout...probably be better off having one an hour before and one straight after workout.

How do you know when you've lost muscle mass? Are you judging by a lack of strength, visual body size or DEXA scans etc.? As long as you are lifting the same weights or more in the gym, you shouldn't drop much in the way of muscle mass whilst cutting. If you are losing strength then you may be on too severe a calorie deficit.

What does your exercise routine look like?

Increase your calories. Judging by what you've posted that would be lucky to be 1500 calories then combine that with HIIT, it's no wonder you're losing muscle size. Diet looks nutritious though so keep that up.

In saying that though I don't know your body composition or needs.

Edited by Dani Boi

Some questions : to what extent or what is the point of the fat loss ? What level are you at now? How much do you weigh? How old are you?

To your questions;

-Types of cardio you found worked the best - include duration, intensity, frequency etc

* In the past I got leaner doing no cardio.

- Meals you found helped keep size whilst helping you become leaner, were they simple to make and cals etc.

*Pre-cook chicken meals that are good to eat cold and take it to work helps.

- Supplements you found helped

*I did work then ate well and appart from the odd shake, didn't require them.

- Things not to do

* Don't Drink booze without accounting for it or working it out.

* Don't have comfortable workouts or routines (That doesn't mean volume it means the whole process).

- Did you change your resistance training? If so why, what exercises were substituted with what?

* No. The diet does the work. Training intensity is not altered

Im 5' 10", currently 85kgs, 25 yrs old.

At a guess my bf % is around 13, I was checked 6 weeks ago and came back @ 15% but I am definitely leaner now.

I still have some ok strength after altering my diet a few weeks ago. Some of my lifting stats are:

- Sets of and up to 40kg d/bell incline bench - 5 weeks ago was doing 50's

- Sets of and up to 22.5kg d/bell flys - 5 weeks ago was doing 27.5's

- 140kg Deadlift - 5 week's ago was doing 200

- 120kg Squats - 5 weeks ago was doing 160

- 30kg D/Bell shoulder press - 5 weeks ago was doing 35/37.5's

- 10kg - lateral exercises (straight armed) - 5 weeks ago was doing 15's

- 35kg preacher curls - 5 weeks ago was doing 45/50

So as you can see.....I'm pretty disappointed. I know that it wasn't just one thing that made me lose size/strength. I went overseas and came back with a fever and a severe chest infection that kept me out of action for a few weeks. I'm confident I will get back to where I was strength wise.

As for the amount of fat I would like to lose... About 3 or so years ago I got a bit out of shape and developed some fat around my mid section. I am in pretty dam good shape right now it's just I still have a little bit of belly fat on the front and sides. It's f*cking gotta go! hahaha. looks out of place! My guess is 5kgs of straight fat loss would be all my body needs to get below or close to 10% BF.

If you have time add a fasted (empty stomach) walk (bout 1hr) or 20/25mins high intersity cardio on an empty stomach. Eat a high protein meal after with minimal carbs as CARBS actually stop the fat burning process.

Lower intensity is better in this instance as you are actually targeting fat and not just burning energy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
×
×
  • Create New...