Jump to content
SAU Community

Recommended Posts

I lived in Amsterdam for a while and could not agree more, Dutch drivers are horrible and German roads are amazing. The most interesting fact I read before driving in Germany (yes I did research so I wasn't just another lost twat doing 100 kph with no idea about the road laws) is that the unrestricted autobahns account for a smaller percentage of accidents than the restricted ones, and when compared by by percentage of the road network, the accident rates are almost exactly the same.

So is speed REALLY the biggest killer on the road? Or is incompetence or over confidence?

I'd say incompetence. People just aren't thinking "safe".

My reasons - based on personal observation only.

If you are a slower driver - stay on the left lane unless you are about to turn right.

When on a hill and your vehicle is slow (or you're an idiot that doesn't downshift) - go to the left lane

Trucks (heavy vehicles) should stick to the left lane, instead of hogging the right hand lane and not allowing cars to overtake safely.

If it's dusk/raining or visibility is questionable for other drivers - turn on your headlights

Use your indicators more - the number of idiots out there never using their indicators is insane.

People that are lane drifting

People without a reasonably maintained vehicle. Car can be old, that's fine - but it has to be in a good roadworthy condition.

This. I'll all for unrestricted autobahn speeds, but many people struggle to drive properly at 100km/h on a nice 4x lane freeway with late model cars... One can only imagine once they are in the outback without all the lanes and nice surfaces...

- Stricter road worthy (say every 5 years)

- Stricter licensing

- Visitors from countries without strict driving rules shouldn't be allowed to rent a vehicle - without passing a simple but comprehensive written test.

- New migrants (even if they have had driving experience) need to pass the same exams as any L plater graduating to their P plates.

Stricter Road Worthys... Yeah that won't help... NSW already do it once a year, and we have so many shit heaps on the road...

Stricter Road Worthys... Yeah that won't help... NSW already do it once a year, and we have so many shit heaps on the road...

How do they slip through the system? I thought the whole point of having regular road worthy is to ensure the car is actually safe. (I'm from Victoria)

How do they slip through the system? I thought the whole point of having regular road worthy is to ensure the car is actually safe. (I'm from Victoria)

No shortage of dodgy or lazy mechanics. All they have to do is press the brake tester in a certain way and it will generate a successful test result, which is pretty much all you need, along with mileage, for a pink slip.

No shortage of dodgy or lazy mechanics. All they have to do is press the brake tester in a certain way and it will generate a successful test result, which is pretty much all you need, along with mileage, for a pink slip.

Yep. One guy i went to just tilted the brake testing device to the left then to the right and then printed out the pass..... Never even put it in the car. That stuff scares me. There needs to be a crack down on this stuff.

It was great when it was open limit. Not surprisingly most people sat on 140-160 with spurts up to 200+ when overtaking a road train.

Since restriction was employed the road toll has gone up.

Most road deaths in the NT are from tourists, the indig, and pedestrians being hit or run over while sleeping on the road.

Passing the coppers was good fun, my weapon of choice was the mighty wagon!

I believe 287km/h indicated on the powerfc in your 260rs ken :P good times and from doing the drive back and forth over the last year a 100km/h is a joke 110km/h is a joke 130km/h is good for fuel ecconomny etc but would be nice to have the option of 150km/h when u need it to get past cars etc. or just to take away the bore, I really don't like these threads, cause unless you live rural and realise what it's like driving at a 100km/h for 12 hours you really shouldn't comment, city folk really have no idea!

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This. A 3d wheel alignment is like $120...just take it to the shop. Since theres probably multiple adjustments that need to be made after changing something. Mine has front/rear lower arms, traction rods, tension rods, camber arms, toe arms, front upper arms, hicas kit, sway bars and coilovers. I measure from the edge of the bolt holes on the originals and set the same length on all the adjustable stuff to dial it as close as I could to OEM. Took it straight for alignment; it didnt feel right at all...after alignment, it feels perfect. Similarly i've just changed the springs on another car; and I still needed multiple adjustments to bring it back in spec.
    • A full Veilside kitted JZA80 Supra in Meriken park in Kobe city a few weeks back
    • Its a well known brand in New Zealand; its a rebrand of the Rhino RAV3.  I don't know what the wiring difference *is* between the rev.1 (installed about 15 years ago) and rev.2; but as you say I would think its reasonable that it uses the same immobiliser relay circuits. I had a look but couldnt see a similar harness; but didnt move things around since I didnt want to mess with it   It was one of AVS well known Authorised Installers; I spoke to AVS themselves about it but theyre unsure hence seeking advice more so from the skyline community who are more familiar with the actual car and its wiring. Im in Auckland; but the installer is on the other side of the city so hes very reluctant to come back to even look at it to confirm something isnt connected into the wrong wire.  I dont want to drop the name since they *did* do a really good job for the most part. Everything is very tidy and he fully replaced all the alarm wiring, all the sensors, the wiring to the door motors, installed a switch which was never installed in the first place...really happy with the alarm install itself..just not this one issue. We all make mistakes, if it is the alarm, I just want my fuel pump getting proper switched, fused, power as it was; without having to shell out for an auto electrician to switch a wire and tell me it was the alarm. 
    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
×
×
  • Create New...