Jump to content
SAU Community

Buy My Skyline Parts So I Can Move Overseas!


Recommended Posts

Moving away in a month and want all this stuff gone. Make an offer

Tial 38mm external gate (new) $180

Tuneagent top mount manifold (new) $250

post-21143-0-27959500-1369269120_thumb.jpg

Front facing plenum (new) $500 with fittings and KKR throttle body and I will throw in the longer accelerator cable you need and thermostat housing. It was never used but has a few scuff marks on it I did a lot of work to make it fit.

post-21143-0-99272500-1364889086_thumb.jpg

Braided turbo lines with speedflow fittings (new) $200

post-21143-0-72900600-1382401031_thumb.jpg

KKR 80mm Throttle body (new) $90

Coolingpro 40mm radiator (new) $300

post-21143-0-99370900-1382400521_thumb.jpg

Z32 AFM with plug and Apexi Power intake (new) $250

post-21143-0-56612000-1382400387_thumb.jpg

Power FC Suit R32 GTR (used) $650 with hand controller that has lines through it

post-21143-0-44218300-1382329767_thumb.jpg

Nismo 600cc injectors suit Rb26 (new) $550

post-21143-0-61321800-1382401157_thumb.jpg

Radiator Breather tank (new) $50

Turbo back twin pipe stainless exhaust (new) $500

Greddy profec b spec 2 (used) $180

R32 GTR seats (Just gotta take a picture of the little tear is has in it and I will post a price been so long I have forgotten what it looks like)

BN Sports front bar rear bar and sideskirts suit R32 4 door (used) $500

post-21143-0-30633100-1364889966_thumb.jpg

Greddy Type S coilovers (used 4 outings) suit R32 (These things were amazing) $1000

post-21143-0-46348500-1364889301_thumb.jpg

Supernow Tierod ends (new) Got this off yahoo auctions years ago. Make me an offer.

R32 vented Fibreglass bonnet (new) $450

post-21143-0-05073000-1382400687_thumb.jpg
RB20det 5 speed Gearbox $400

post-21143-0-56612000-1382400387_thumb.jpg

post-21143-0-99370900-1382400521_thumb.jpg

post-21143-0-05073000-1382400687_thumb.jpg

post-21143-0-72900600-1382401031_thumb.jpg

post-21143-0-61321800-1382401157_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...