Jump to content
SAU Community

Recommended Posts

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.

I can ship anything anywhere if you pay for it. Pickup is available no probs.

Location: Homebush/Sydney

===========================================

RB-Z gearbox

RB bellhousing with Z32 rear housing (RB and Z32 gearsets are the same)

- bolts onto an RB-series motor, RB20, RB25, RB26, RB30

- comes with Z32 shifter setup (not pictured)

- great for RB-motor conversions

- if you have an rb30/26 for sale then let me know I might buy it from you and use this gearbox behind it.

Price: $950

j8fg.jpg

===========================================

Blitz I-color Spec R twin solenoid sequential boost controller with 3/4 optional extras

*** all up it's a boost controller with gear or speed sensitive boost, boost gauge, water temp gauge, oil temp gauge, oil pressure gauge, multichannel logging system and performance meter ***

- best boost controller hands down

- twin solenoid for stable boost control

- all in one monitoring system so you don't need 6 gauges across your dash

- includes the optional Blitz oil temp sensor, plug and play

- includes the optional Blitz oil pressure sensor, plug and play

- includes the optional Blitz auxiliary-in wiring harness, plug and play

- I set it up to monitor water temperature as well

- can also monitor stuff like throttle position, AFM voltage, injector usage etc

- includes a set of s15 sun visors where I've mounted the display

Price = $750

ut0c.jpg2ls0.jpgzqed.jpg

===========================================

Auto Service MATSUFUJI s14 clutch pedal brace, may fit s15 and s13 but I don't know for sure.

This braces the clutch pedal bracket and stops it from flexing; is a good mod for those that run tuff clutches or likes to kick it once in a while. Stops the flex and stops the pedal bracket from breaking.

BRAND NEW

Price: $80

Price drop: $60

Price drop: $50

img6212custom.jpgimg6214custom.jpg

===========================================

Brand new genuine Turbosmart 4" straight silicon

Price: $20

img8465sb.jpg

===========================================

Other info:

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.

I can ship anything anywhere if you pay for it. Pickup is available no probs.

Location: Homebush/Sydney

  • 2 weeks later...

Yep i-color is available (the sensor set is sold though)

Gearbox condition is meant to be good, I haven't used it myself as I'm still tossing up the RB30/26 idea. You're welcome to come check it out :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...