Jump to content
SAU Community

Recommended Posts

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.

I can ship anything anywhere if you pay for it. Pickup is available no probs.

Location: Homebush/Sydney

===========================================

RB-Z gearbox

RB bellhousing with Z32 rear housing (RB and Z32 gearsets are the same)

- bolts onto an RB-series motor, RB20, RB25, RB26, RB30

- comes with Z32 shifter setup (not pictured)

- great for RB-motor conversions

- if you have an rb30/26 for sale then let me know I might buy it from you and use this gearbox behind it.

Price: $950

j8fg.jpg

===========================================

Blitz I-color Spec R twin solenoid sequential boost controller with 3/4 optional extras

*** all up it's a boost controller with gear or speed sensitive boost, boost gauge, water temp gauge, oil temp gauge, oil pressure gauge, multichannel logging system and performance meter ***

- best boost controller hands down

- twin solenoid for stable boost control

- all in one monitoring system so you don't need 6 gauges across your dash

- includes the optional Blitz oil temp sensor, plug and play

- includes the optional Blitz oil pressure sensor, plug and play

- includes the optional Blitz auxiliary-in wiring harness, plug and play

- I set it up to monitor water temperature as well

- can also monitor stuff like throttle position, AFM voltage, injector usage etc

- includes a set of s15 sun visors where I've mounted the display

Price = $750

ut0c.jpg2ls0.jpgzqed.jpg

===========================================

Auto Service MATSUFUJI s14 clutch pedal brace, may fit s15 and s13 but I don't know for sure.

This braces the clutch pedal bracket and stops it from flexing; is a good mod for those that run tuff clutches or likes to kick it once in a while. Stops the flex and stops the pedal bracket from breaking.

BRAND NEW

Price: $80

Price drop: $60

Price drop: $50

img6212custom.jpgimg6214custom.jpg

===========================================

Brand new genuine Turbosmart 4" straight silicon

Price: $20

img8465sb.jpg

===========================================

Other info:

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.

I can ship anything anywhere if you pay for it. Pickup is available no probs.

Location: Homebush/Sydney

  • 2 weeks later...

Yep i-color is available (the sensor set is sold though)

Gearbox condition is meant to be good, I haven't used it myself as I'm still tossing up the RB30/26 idea. You're welcome to come check it out :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...