Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm new to the skyline scene. Bought myself a R33 GTS-T not long ago. It's currently completely stock.

I have decided to slightly modify it. However, I'm not willing to spend ridiculous amounts of money on it. I'm basically in need of help as to what mods are the best value for money.

I currently have these in mind:

- CAI

- FMI

- Full exhaust system

- Tune

Please recommend any places in Sydney as well as what you think. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/434174-r33-gts-t-modifications/
Share on other sites

Modifying a skyline and not spending what some would call ridiculous money dont work in the same sentence.

You do realise to tune, you require an aftermarket ecu a chip or piggy back atleast. Bring on the money to he spent.

Fmic

Nistune

Full exhaust

Drive...

Then do maintenance

There is $2k

Im new to the 33 aswell and mine has a full xforce exhaust 3.5 inch and theres a receipt for $860 supply and fitted. The one thing i would say is that dont go for a center muffler type but go for the resonator style on any exhaust for exhaust height clearance.

I had a xforce ( http://www.xforce.com.au/products.php?make=Nissan&model=3) with the oval resonator and excluding cat installed after I was rear ended last year. If I recall it was $900. Doesn't sound too bad just recently replaced stock cat with a steel high flow venom 4.25" cat and it sounds pretty good with it. (Due to over fueling it is now popping flames though). If your going to upgrade the zaust wouldn't hurt replacing your down pipe as well (if still stock) for better air flow.

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

Edited by mark33gtst
  • Like 3

Thanks mate. Definitely going to try and build my knowledge base from here!

Theres alot to learn from these forums... ill give you advice from my personal experience. Just spent $5k on my car and the bottom end popped a few hours later. Don't make this mistake - make sure you thoroughly check the engine's health before you start modding up anything :)

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

First thing to do:

timing belt, water pump

Reason why?

Most imports have had their clock wound back, or clusters have been replaced

Then:

  1. Full exhaust (just get 2nd hand) ~$500
  2. Intercooler of some sort, even a R34 GT-t side mount $100
  3. Hit up Toshi for a socketed stock ECU with a new ROM tuned for AU 98 Octane fuel ~$350
  4. Turbotech MBC 0.8bar ~$30
  5. Fry tyres ~Priceless

Everybody loves frying tires :)

I would recommend being very patient and compiling a list of mods you want to do. Then research them to death before spending. Worst thing you can do is rush into buying things and have to spend money on the same thing twice. Have a look through the for sale section and maybe pick up some 2nd hand bits. That way if for example you buy an exhaust and you decide its too loud/ too quiet for your taste you can simply sell it for (in theory) the same price you bought it for.

Have a look through the forums. This question has been asked and answered many times. Have a serious think about your goals for the car and go shopping!

PS don't be too cheap with your mods. Do it once and do it right!

This times 1000!!! I spent about 20 grand on mine when I bought it. Thinking back now could of saved a lot of time and MONEY by researching more. I would of saved about 8 grand and over a year of time for a better result.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
×
×
  • Create New...