Jump to content
SAU Community

Recommended Posts

3x S14 manual gearbox Xmembers.$50 each

R33 rotors and calipers $400
s13 and r33 interior plastics, prices depending on what bit you're after.
R33 doors , L and R, $100 each including door cards and switches
S15 drivers guard $100
R33 front guards, Red ones $80, black ones $100
R34 rb25 block, under 80,000ks on it, rest of engine got parted out $200
R34 rb25 crank $100 no journal damage
New Rb25 sump, never been fitted, no scratches $100
2nd hand rb25 sump, $50
various radius rods(caster rods) let me know what measurement you want and ill see if i have some(i have a milk crate full of them for some reason) All appear to have good bushes in them $25 a pair
R33 caster rod brackets $50 the pair
r33 cross member, drops your rb lower than cefiro or r32 xmember does. $100
R33 lca's $150
S13 digital dash cluster $50
S15 JDM drivers side tail light $50
R33 tail lights $50 a side.
S13 bonnet (black) $80
R33 rear bumper $50
S13 rear bumper $50
S13 veilside rear bumper $50
S13 front bumper $50
S13 front reo, undamaged, uncut $150
will post up more as I remember what I've got...

come get it yourself, I'm not stuffing about posting things.

Located towards Ipswich. Pics available as reqiured

Link to comment
https://www.sau.com.au/forums/topic/434361-r33-s13-and-s15-bits-and-pieces/
Share on other sites

  • 1 month later...


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...