Jump to content
SAU Community

Recommended Posts

Z32 AFM or R35 GTR AFM , 550 or 740cc nismo injector if 98 octane fuel , boost controller HKS EVC or Blitz dual solenoid , bigger fuel pump.

Stock engine 17psi max for safe , 0.8m gap spark plugs.

It has a boost controller, not sure of the current AFM (how can I tell?).

Z32 AFM or R35 GTR AFM , 550 or 740cc nismo injector if 98 octane fuel , boost controller HKS EVC or Blitz dual solenoid , bigger fuel pump.

Stock engine 17psi max for safe , 0.8m gap spark plugs.

It has a boost controller, not sure of the current AFM (how can I tell?).

Also I had a quick scan through and didnt see the answer, u said ur coilpacks were black so sound standard. Get urself some splitfires, they r blue.

Lots of guys run these turbo's, myself included. Injectors, coil packs, fuel pump exhaust fmic, afm and ecu are a must at minimum, needs to be able to read the new amount of air coming into the engine, then supply the fuel for it at higher boost levels. I suggested coil packs because u never really know when a standard one will crack.

If you want to get into drift, save up $5k and buy an unregisterable drift car and a trailer.

I'm serious, waste of money otherwise.

If you want your car to be nice on the street then just go tune + injectors + clutch + new tyres + pump + FMIC + afm and leave it at that, remember to keep all your stock gear for when you get defected and have to put it back to stock, lots of people forget that.

Expensive hobby cars are!

Edited by Rolls

I find the skyline tanks pretty good in design, I drove my car around Wakefield into the last 1/4 and no fuelling issues at all.. mind you, it's still a stock piece of shit but you get the idea.

Nope, they are fine.

I track my car on a fortnightly basis, i have never had fuel issues with stock fuel setup ( apart from 255 pump)

Its certainly not a stock piece of shit either :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...