Jump to content
SAU Community

Recommended Posts

contact whistla on these forums, he's in VIC too and got his Wolf 3d installed in his R33. I think his was manual tho. Work was done by some rotary workshop from memory.

i have a wolf plug in in my auto r33 the only thing thats wrong with it is gear changing from 1st to 2nd is pretty hard and it holds gears longer i had mine supplied and fitted by peter at rank rotary in mentone ph 95851906

That seems to be the problem with aftermarket ecu's in autos, the gearchange quality suffers. That's why I am going with the less than perfect solution of an SAFC. :)

gear change isnt a problem as long as you bridge across the plug for both the 3/4 throttle position (kickdown) and the TP sensor for shift points. These inputs go into the original ECU, then back out to go to the PCM.

Mine changes beautifully....

gear change isnt a problem as long as you bridge across the plug for both the 3/4 throttle position (kickdown) and the TP sensor for shift points. These inputs go into the original ECU, then back out to go to the PCM.

Mine changes beautifully....

Hi i dont spose you have any pics of the plug that has to be bridged? did you do yours yourself?

its the plug at the ecu, you just have to bridge some pins at the plug.

I have all the diagrams somewhere, ill have a look tomorrow and let you know, what i have here is the signals go from pins 38 and 57, i think they go to pins 14 and 5, but ill have to look at mine to be sure and see which one goes where.

a mate of mine is selling a brand new plug in wolf with warranty etc all brand new in the box never used for 1300 i dunno what thats like price wise but it sounds ok to me..... if u are at all intrested it may save ya some cash... cheers Jon

That's the price you buy it from the "retailer", no savings there.

I too have a wolf 3D, my car is a manual. Also tuned at Rank Rotary, with some finner idle adjustments done at EAS Performance.

i didnt get around to it today, but the easiest way to do it, the way i did, is the check pins 14 and 5 with the nissan ecu connected, see what voltages they have coming out (use a digital multimeter, NOT analogue). one should have a voltage that increases from around 0 volts closed throttle to around 5 volts WOT. This pin is the sensor signal OUT to the PCM. Once you have found it, and you have your new computer ready to plug in, simply run a bridging wire from pin 38 to the one that showed the variable voltage.

Without this feed from the TPS, the PCM has no idea of throttle position, so upchanges and down changes will be erratic, AND, line pressure could also be low, which could cause slippage in the clucth packs and bands.

I think from memory that the 3/4 postion throttle switch also goes out to the PCM, for kickdown, but i'll have to check mine to be sure.

I'm not running the wolf, im running a motec m48, but obviously the principal is the same.

Hope this helps.

This wiring diagram is one of the best i could find, its large, (1.2 mb jpg) but very clear.

If you can, print it out on A3,.

http://members.iinet.net.au/~kbam/rb25diagram.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...