Venolia, Nitto I-Beam Rods & Tomei Ex Procam

[Pezhead]

So, I've picked up someone else build to accelerate my own and need to start clearing some of my un-needed parts.

1 set of New RB26 Venolia Pistons 86.5mm with N1 rings and pins -SOLD-

1 set of used Nitto I-Beam Rods (Not for sale anymore)

[update] 1 Set of used Carrillo H-Beam Rods $450

(need to have the small end bushes replaced due to JE Pin's being oversized from stock)

1 Used Tomei Exhaust (ONLY) Procam 270 degree 10.25mm lift $200

Can post at buyers expense.

MORE STUFF:

Used N1 Oil Pump with Reimax Gears - Gears are less than 6000km old, housing has approx 50k $400 (Sold - pending)

Used Tomei Poncams for RB26DETT 260 degree 9.15mm lift, intake and exhaust -SOLD-

Stock RB26 Valve Springs and Retainers $100

RB26 Water Pump (new) $60

[Pezhead]

pics of the parts

[Pezhead]

Bump. Still for sale.

[Pezhead]

Pistons sold.

Rods and Cam still available.

[DannyzGTR]

Location?

[Pezhead]

Turramurra.

[boosted_wagon]

Hey bud what's the condition on the rods, can u pm me please it won't allow me to pm u for some reason

[cuong nguyen]

will this cam fit into a rb25?

[Pezhead]

Cams are for an RB26 head. Unsure if you can swap them. And if you did, would have to be a Neo head to get solid lifters for that much lift.

[Pezhead]

Bumpie

[Pezhead]

some more stuff for sale:

Used N1 Oil Pump with Reimax Gears - Gears are less than 6000km old, housing has approx 50k $400 (sold - pending)

Used Tomei Poncams for RB26DETT 260 degree 9.15mm lift, intake and exhaust -SOLD-

Stock RB26 Valve Springs and Retainers (used) $100

RB26 Water Pump (new) $60

[Kan3o]

Hi mate just wondering if you still have the oil pump for sale?

[Pezhead]

Yup the pump is still for sale. There is a small chip on the cosmetic bit that covers the cam belt though. Doesn't affect the structural or functional part at all. Just wanted to be clear. Can upload a pic tonight when. I get home.

[godz_85]

some new stuff for sale:

Used N1 Oil Pump with Reimax Gears - Gears are less than 6000km old, housing has approx 50k $400

Tomei Poncams for RB26DETT 260 degree 9.15mm lift, intake and exhaust $500

Stock RB26 Valve Springs and Retainers $100

RB26 Water Pump (new) $60

Hey mate are the cams still available ?

[Pezhead]

Yes still available. Should clarify they they are used but good condition.

[Pezhead]

Some pics.

[Pezhead]

Lots of parts still available folks.

[Pezhead]

Poncams have sold. I still have the other parts (including the 270 Exhaust Procam) for sale.

[Pezhead]

Oil pump sold - pending full payment.

Also the I-beams are on hold. I might use them in my motor. If I do then will have my Carillo H-Beams for sale instead. Will find out based on advice from machine shop this week.

[Pezhead]

Small change of plans on my build. I'm going to use the Nitto Rods. So now my Carrillo H-Beams are up for sale.

1 Set of used Carrillo H-Beam Rods $450

(need to have the small end bushes replaced due to JE Pin's being oversized from stock)