Jump to content
SAU Community

Recommended Posts

Here are some parts that are lying around in the garage that i want gone:

S13/r32 lower control arms. can get pics if needed: $150

NRG Quick Tilt, will need a short boss kit to fit. Great for anti-theft as the included lock covers steering wheel nuts: $160

post-74083-0-72041600-1385629371_thumb.jpgpost-74083-0-18227600-1385629378_thumb.jpgpost-74083-0-64876600-1385629384_thumb.jpgpost-74083-0-84201500-1385629389_thumb.jpgpost-74083-0-37951700-1385629396_thumb.jpgpost-74083-0-15464600-1385629404_thumb.jpg

R33/RB25 std turbo + manifold, 80xxx km, never had any troubles, upgraded to 3076. Everyone knows what they look like, can get pics if needed: $250

R33/RB25 advance mild steel 3” dump to cat to suit standard turbo with screamer pipe: $150

post-74083-0-97967200-1385629533_thumb.jpgpost-74083-0-73817100-1385629539_thumb.jpgpost-74083-0-00223500-1385629547_thumb.jpg

Superspark coilpacks, good condition, holding 300rwkw fine, however got a good price on Yukon coilpacks so will be swapping them over soon. $200

post-74083-0-22301900-1385629524_thumb.jpgpost-74083-0-75560600-1385629527_thumb.jpg

Excedy cushion button clutch (pink) to suit rb (push style) upgraded to giken twin and its been sitting around for too long. Little rusty but works fine, great clutch for feel and bite. $250

post-74083-0-09462700-1385629553_thumb.jpgpost-74083-0-98748600-1385629558_thumb.jpg

Located in Launceston Tasmania, can post Aus wide.

Contact me on: 0407 323 643

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...