Jump to content
SAU Community

Recommended Posts

Ouch, just read this, sorry to hear about it Hanaldo, I think GPS is probably on my to-do list now, what with all these car (Skyline) thefts lately

do it.

I was similarly thinking of such measures but didn't get around to it. My car was stolen in Oct and still MIA...

Also security systems and immobilisers mean FA these days as the crims know it is on there. There are always stolen via the actual keys getting stolen.

Yep, gonna be making a keypad ignition cut and getting Gps tracking. Won't be as simple as taking my keys next time that's for sure. Realistically I know they can still steal bit if they really want to, but it makes it harder for them and gives me a chance.

I am thinking of selling the car now though. As much as I would miss it. I don't know if I will be able to enjoy it as much now, knowing what it's been through and what it's been used for. Not sure, need to have a good think about what I want now.

I am thinking of selling the car now though. As much as I would miss it. I don't know if I will be able to enjoy it as much now, knowing what it's been through and what it's been used for. Not sure, need to have a good think about what I want now.

wait till you get it back and assess its condition before you think along those lines. You never know how easy they have taken it until that point to avoid attention and what made them call it a day n dump it.

Otherwise, even if they have given it some berries often they just chew the clutch out in 5 mins and that's it.

compression test, gearbox check, and otherwise condition of the car. otherwise all else are replaceable consumables.

Yeh it's getting towed to my mechanic and full mechanical check. Will also purge the fuel tank, full oil and filter changes etc.

Unfortunately I know for a fact they've been raping it. Don't want to disclose too much here, but I have got witness accounts. The trouble with my car is the flex fuel tune wasn't finished. It wasn't meant to be driven hard on 98, that was only supposed to be a last resort type thing. But these guys have taken my car with a completely empty tank, and no doubt have no idea what E85 is. So they would have filled it up with 98 at a minimum but most likely 91 even. Then have been smashing it all over town, were involved in a high speed pursuit with police on Wednesday night, etc.

I will be very surprised if there is no damage.

Edited by Hanaldo

I take it you are now confident your car can out run the cops? Worst case engine is stuffed, insurance replaces it and hopefully your issues are fixed.

You've spent way too much time and money to give up on it.

Ah, then yes, I feel your sentiment of not wanting it back...

Insured I hope.?

Hahaha, when my car was stolen n the cops werent taking it seriously I told them they should take it seriously cos they will have f**k all chance of catching it if its in the right hands. Hopefully this teaches them...

Yeh apparently the car can do it, not confident at all that I could pilot it haha. 0 interest in trying either, god damn. I've got shit to live for, I really feel sorry for people that decide their lives are so worthless they would risk throwing them away like that.

As for motor, it still wouldn't go over my insurance excess. 3k excess, even if the motor was completely farked, I'd still have to fork out for it. Unless they funded building the motor :P

Car was left in Swan View, Brown Park.

Yeah I know the place

Well done on getting the car back in one piece

Best outcome ever for a stolen car let alone one thats been on the side of the road broken down for more than five minutes (smashed up or set on fire for larfs. . Or both)

Yeh the cops were equally amazed. Said they've never seen one left in such good condition. I do think they weren't done with it yet, that we got the car while they were in the process of robbing another place. Consider myself very lucky though, and it's a huge testament to the good that Facebook can do.

Be aware when it comes to robberies and break ins. . . Thieves do come back especially after they have checked out the place when they were first there, selling your 34 wont change that

Oh I am very much aware. Currently looking into getting roller shutters on all the windows, and security screens on my glass sliding doors. In the mean time I have a rather heavy 250ft/lb torque wrench sitting here beside me, would be a real shame if I were to accidentally swing it in surprise at somebody coming through my window...

  • Like 1

Sorry to hear you had to go through this, mate. These people are turds. Only thing that will put them off is a big dog. I have GPS tracking and high tech alarm - and a big dog. Secure parking at work and locked garage at home - with the dog able to roam around it! Make sure you get an independent assessment of your engine, transmission, suspension, wheels, tyres, etc. Anything the b'stards could have screwed. You need someone independent from your usual workshop to assess it so you can make a detailed claim. Even if the insurers will only pay for replacement with a stock motor, you need to prove the motor is stuffed to get replacement. Then buy back the usable parts from them and rebuild. Hopefully if you have declared the mods, they will pay for rebuild. Bear in mind that getting money from insurance companies is like getting blood from a stone. Hence an independent report. Witness reports of it being thrashed will help.

Best of luck. And I hope they find and hang the b'stards!

Bear in mind that getting money from insurance companies is like getting blood from a stone. Hence an independent report. Witness reports of it being thrashed will help.

often yes. but iv always found that Shannons are A1.

When my car was stolen (see my thread here for that one) they took 2.5 weeks to declare it written off, settled and money in my account without any mucking around.

They are truly awesome.

Good luck with yours though mate. n regardless of a good payout is that they have destroyed the think we loved and spent so many hours learning about, working on, and enjoying. N they just go n f**k it up. Lowest of the low.

That's no good, saw on fb. Excess is 3k.. Fkn hell. Too many kids writing these jap cars off and ruining it for the rest of us.

1 old trick is to leave the car key out in the open with the alarm key separate so when they unlock the car door they set the alarm off.

Also you don't keep wrenches or baseball bats around unless u want prison time, you use oven cleaner and aim for the eyes, holds up in court and has lasting effects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...