Jump to content
SAU Community

R34 25De Neo .. Tiptronic Transmission Messing Up. Need Advice.

RishantS

By RishantS,
in General Automotive Discussion

 Share

Recommended Posts

RishantS Newbie

RishantS

Posted
Posted (edited)

Hello, first time forum poster.

I have a R34 25GT Neo.
It's tiptronic.

A few days ago my car wouldn't shift out of third. It would just continue running in it and sound like a dying cow. the A/T light is on and flashes about 13 times. This happened for the last 3 days. Even if i switched it to tip and drove, it would still stick to 3rd.

But today I turned it on went to gym, I got back in it in an a hour or so and started driving again. The car drove in all the gears, fine. Then the A/T light came one and it just drove on 3rd. It's weird because everytime i shut it of and then on and drive it works fine on all gears for a little while and then goes and sticks to 3rd .

I switched it to tip and drove, it would work fine.. but after a while just go back to third. and I'd have restart to get it to run on all gears again.

I was able to thrash it as well, and it shifted smoothly..

some advice would be nice because i dont think it is a mechanical problem.

can someone also let me know what type of transmission fluid to get.

Edited by RishantS
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...