Jump to content
SAU Community

Hks 2530 Turbos Like New

markos125
 Share

Recommended Posts

markos125 Apprentice

markos125

Posted
Posted

Parting out my Gtr , hks 2530 turbos like new quick sale $800 no shaft play at all, these will go like hot cakes payed $2500 them new ! Tomei type B cams like new $200,Only reason so cheap rego is due on my wife's car, and the little turbo rice car has to go, will post registered express to buyer any where in australia.

Link to comment
https://www.sau.com.au/forums/topic/437382-hks-2530-turbos-like-new/
Share on other sites
gtr13 Proficient

gtr13

Posted
Posted (edited)

Do both these turbos come from a RB26 as both housings look different to normal 2530's from a RB26 no divider between the wastegate and exhaust wheel and one has the actuator mounted in a different position to the other they look to be from a 300zx VG30DETT engine ,do they both have the same matching numbers on the ID tags and is the tag in the photo from that turbo as that photo is from a ad on SAU from 2005 selling a SR20 turbo

http://www.skylinesaustralia.com/forums/topic/67061-fs-hks-gt2530/

Edited by gtr13
PYSGTR Collaborator

PYSGTR

Posted
Posted

I've been trying to buy the cams off of this person, was quick to send me bank details minus his name but won't contact me via phone and won't send photos of the cams with today's date. Be aware people!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...