Jump to content
SAU Community

Recommended Posts

Parting out my Gtr , hks 2530 turbos like new quick sale $800 no shaft play at all, these will go like hot cakes payed $2500 them new ! Tomei type B cams like new $200,Only reason so cheap rego is due on my wife's car, and the little turbo rice car has to go, will post registered express to buyer any where in australia.

Link to comment
https://www.sau.com.au/forums/topic/437382-hks-2530-turbos-like-new/
Share on other sites

Do both these turbos come from a RB26 as both housings look different to normal 2530's from a RB26 no divider between the wastegate and exhaust wheel and one has the actuator mounted in a different position to the other they look to be from a 300zx VG30DETT engine ,do they both have the same matching numbers on the ID tags and is the tag in the photo from that turbo as that photo is from a ad on SAU from 2005 selling a SR20 turbo

http://www.skylinesaustralia.com/forums/topic/67061-fs-hks-gt2530/

Edited by gtr13

I've been trying to buy the cams off of this person, was quick to send me bank details minus his name but won't contact me via phone and won't send photos of the cams with today's date. Be aware people!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...