Jump to content
SAU Community

Recommended Posts

Oh yuk, get rid of them

I suggest the UE cams to every one, they are a good setup and if I had of put some more thought into my head while the motor was apart I would have a set

If you want to change cams with "boltins" then either stock or type R poncams

This was the info I got back? Too late for the Poncams B, BUT that is life :blush:

The engines are designed with a certain power band range when we design and build them .

The power band of the PTE6266B CEA SP is perfect for the engines power band range of 4500 pm to 85000rpm ( std engine rpm range is 4000 to 8000 rpm ).

There is a turbo that is one size down from the 6266 and that is the PTE6262B CEA SP. This will give you a similar power band range as the original engine ( 4000 to 8000 rpm ).

Keep in mind that the exhaust manifold will need to be modified to suit either new turbo set up.

post-52098-0-87863000-1393487205_thumb.jpg

i am also looking in to a turbo upgrade (Black R34 V-Spec as well)

in two minds to go with the ever proven HKS GT-SS or newer technology singles like 6262.

ideally, really like to go for a ride in a car with 6262 on a stockist engine...

commented more to subscribe.

i am also looking in to a turbo upgrade (Black R34 V-Spec as well)

in two minds to go with the ever proven HKS GT-SS or newer technology singles like 6262.

ideally, really like to go for a ride in a car with 6262 on a stockist engine...

commented more to subscribe.

Mine is not a V-Spec 11 , it is something the car yard put on for DHs like me that did not know, but still happy :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...