Jump to content
SAU Community

Happy Laps - Queensland Raceway 22-03-14


Recommended Posts

Lol, all those turns, are you trying to make it easy for the evos?

QR's decision not ours, but corners sort the drivers out from the drag queen...like Nick.

Does everyones skyline handle that badly that a few evos would humiliate them on that circuit layout?

Nope, I love the corners.

Does everyones skyline handle that badly that a few evos would humiliate them on that circuit layout?

love the spirit,and no mine handles just fine,can corner with the best of them,just havent got the power on the straight as pretty standard.

Does everyones skyline handle that badly that a few evos would humiliate them on that circuit layout?

No but having a built auto It definetly prefers Getting wound up down the straights rather than corners, the stall try's to kill me

I'm out now unless I can get a new lock bar and tie rods by tomorrow :(

It some how stripped the threads on one side.

Too many one wheel bandits? Pop in to Japan Autos in Clontaff they surely have something to help you out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...