Jump to content
SAU Community

Nsw - Ae86 Toyota Sprinter , Jdm , Modified , Blacktop 20V

GRK35L

By GRK35L,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

GRK35L Rising Star

GRK35L

Posted
Posted

Up for sale is my Toyota Sprinter AE86. Bought the car off a mate not long ago to help them out and am putting it up for sale to see if I have any interest in it. Car has had a lot of work put into it and is perfect for a p plater who wants a modified non turbo car or anyone who loves the AE86.

The car has the following modifications:

• Custom plates (ae85ix)
• 20v 4age blacktop (from ae111)
• Stainless steel custom made trumpets by sq engineering
• 2.5inch stainless steel exhaust
• Spitfire ignition leads
• Ls1 coil packs
• T50 5-speed manual
• Exedy clutch
• Aftermarket boss kit and deep corn steering wheel
• Strut braces front and rear
• Cusco full body kit with drift wing
• Locked t-series diff
• White hi/low hids
• Surge tank and vl fuel pump
• Enkei crossfevers 4x114.3 14x7 offset +8 all round
• Tuned by dvs jez on central coast
• Haltec platnum sports 1000 ecu
• Alloy radiator with thermo fan
• G4 coilovers with adjustable strut tops, full rear coilovers with mounts and brace
• Adj panhard
• 290cc injectors
• Aftermarket sway-bar
• Extractors
• Retrimmed interior with bride trim and black dash, black roof lining, black carpet etc


Car probably has more modifications that I am forgetting about but it has had a lot of work done. I am selling as I am chasing something a little different. I do like the Sprinters but am really looking for something else. I also currently have this and another project car so space is a premium so would like to free up a bit of space if I can.

There are only two little gripes I have with this car. Speedo cable has been cut so the speedo dosen’t work (Needs a new one fitted to get the dash happening again). There is a tacho however mounted to the wheel which does work. Was planning to fix it but since I am planning to get rid of the car don’t really want to spend the money at this stage. The other thing I would say is the body is a little rough. Car looks amazing but just some minor imperfections on the body (expected from a 30 year old car) perhaps I am a bit fussy.

Car is truly a great car to drive.
Price: $14 500 ono (Starting price so make me an offer)
Phone: Please Text on 0404519365 (my work is all over the place so easier to text) Not on this forum much either so text is best way to get me.
Swaps?: I am really looking for cash. I would consider swaps for a Auto Turbo Supra (if its aero top even better). May be interested in other jap cars so let me know what u got.
AE86158-Optimized_zps4ae3d71e.jpg
AE86155-Optimized_zpsec971408.jpg
AE86163-Optimized_zps4959d293.jpg
AE86162-Optimized_zpsc2178fa5.jpg
AE86164-Optimized_zps80bff4a9.jpg
AE86159-Optimized_zps9133ae0d.jpg
AE86165-Optimized_zpsad9f81b8.jpg
AE86166-Optimized_zpse87b6676.jpg
AE86170-Optimized_zpse55140ec.jpg
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...