Jump to content
SAU Community

Recommended Posts

(Just Paid Full reg)

Bike has low KMS its hardly ridden as I work 50-60 hours a week. This bike is to fast. When you will see you will be very happy its bassicaly showroom condition that is all.

2012 Ducati 848 EVO.

Never ridden in the rain.

Never been dropped.

Low KMS! 1600km (BP FUEL ONLY)

1st Service is already done. 1000kms

Ridden 5 times.

Brought this baby brand new from the dealership 1st owner. In cash not financed.

This bike comes with all the manuals/Books spare keys and even bag! (seen in picture)

Ducati Performance Plexiglass Smoked Tall Windscreen $160.90

Ducati Performance EVO Termignoni Carbon Slip-On Exhaust + ECU $3000

Werkes LED Inbuilt Tailight $99.95

Ducati Performance 848 EVO Fiberglass Seat Cover: Arctic White $160.90

Ducati Performance 848 EVO Carbon Heat Guard $189.50

Ducati Performance 848 EVO Rear Carbon Fender $252.30

Ducati Performance 848 EVO Carbon Front Fender $343.00

HealTech Electronics Gear Indicator Pro-DS Series $169.95

(all the factory parts will also be supplied)

RARE COLOUR .

More then welcome to organize Ducati to inspect it.

Reason for sale; Need deposit for a house. Dont even have time to ride as the KM's are low!

Price is negotiable;

Price 17,500 grab yourself a bargain!

Bike

2012 Ducati 848 EVO

Price

$17,500*

Odometer

3,200 km

Colour

Arctic White Silk

Body

Super Sport

Country of Origin

ITALY

I am also willing to swap for a Jet ski! has to be 2013+ nothing older thank you.

l86a.jpg

mgv3.jpg

69eq.jpg

yngj.jpg

qxwr.jpg

ysu2.jpg

x1nr.jpg

0t93.jpg

mz7w.jpg

96lm.jpg

Edited by geraus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...