Jump to content
SAU Community

Rb26 Tomei Oil Pump, Greddy Radiator. Sard 800Cc Injectors. Momo 5Zigen Steering Wheels

bodbod
 Share

Recommended Posts

bodbod Collaborator

bodbod

Posted
Posted

Tomei oil pump very low kms was told 1000km. Havent used it. Reason for selling is I have two of them was going to put it on my current rb26 while I build my tomei 2.8 but just decided to drop the 2.8 in. Was very hard to pick between the two as they are both in about the same condition bought them borh off sau. $1200

Greddy radiator havent used it also as I have an r33 and this radiator is about 2inches taller. Think r34 gtr not sure maybe someone can chime in. $500

Sard 800cc injectors. Also havent used these. Bought off sau. Told 3000km. $500

Genuine momo suede wheel and genuine 5zigen wheel. Suede almost gone on momo. Leather slightly coming away on 5zigen wheel. Both made in italy $150 each

post-85987-0-40919000-1392450060_thumb.jpg

post-85987-0-06691000-1392450089_thumb.jpg

post-85987-0-90721900-1392450109_thumb.jpg

post-85987-0-81906600-1392450134_thumb.jpg

post-85987-0-71123900-1392450171_thumb.jpg

post-85987-0-10307200-1392450234_thumb.jpg

post-85987-0-61633400-1392450268_thumb.jpg

post-85987-0-88962400-1392450788_thumb.jpg

bodbod Collaborator

bodbod

Posted
  • Author
Posted

Yeah ive had many offers at that price. I paid $1300 for the pump and havent used it...so im already selling it at a loss

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • MBS206
      RB25DET with solid lifters - which cams ?

      By MBS206 · Posted

      Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • MBS206
      NC MX5

      By MBS206 · Posted

      They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...