Jump to content
SAU Community

Advan Avs Bbs Wheels... Hks Turbo


Recommended Posts

Need some cash for ongoing projects... open to offers on some gear.

16x7 +22 BBS Wheels with shagged tires and center caps.... $300

post-22624-0-62314100-1392976056_thumb.jpgpost-22624-0-05527500-1392976086_thumb.jpgpost-22624-0-07436900-1392976100_thumb.jpg

Some old school cool Advan twin trispokes... 18 x 8.5 and 18 x 9 some center trim. 50% tires..... $600

post-22624-0-53435500-1392976312_thumb.jpgpost-22624-0-38029000-1392976319_thumb.jpg

post-22624-0-22406800-1392976324_thumb.jpgpost-22624-0-42991900-1392976330_thumb.jpg

AVS VS5's 17 x 9 +20something, no tires and very minor scuffing. The tires on the rims in the pictures are 275/40/17 drag tires (not for sale).

$700

post-22624-0-86922900-1392977020_thumb.jpgpost-22624-0-69072200-1392977036_thumb.jpg

Silver CF Bonnet R32... needs a clean up on the underside, perfect top condition... $500

post-22624-0-64862400-1359840226_thumb.j

HKS T300 Garrett turbo- $500 Shaft play is very minimal, seals look to be good, as part of an older rb25 hks kit. Good for 450-500hp.

post-22624-0-28879500-1374220270_thumb.j

Also have a set of 17x9 +20 AVS model 17.2 .. but don't really want to let them go. will entertain reasonable offers.

post-22624-0-84664800-1392977580_thumb.jpg

Cheers

Justin

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/439511-advan-avs-bbs-wheels-hks-turbo/
Share on other sites

  • 2 months later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...