Jump to content
SAU Community

Recommended Posts

S2 25det vct solenoid 50$

Cas (spank angle seonsor) 150$

Z32 maf+plug from 20det loom 200$

R32 dmax style ducktail. Currently wrapped in matte black crap needs a sand off the top, as it's scratched up. Offers ?

Also have a forward plenum for s2 25det custom made onto stock intake runners with 80mm throttle bodie (from memory) , has a small crack so I it never went on

Pm me for full deets

All items located Dora creek, or thornleigh during the day, prices negotiable

0406856323 text for other pics

post-112129-0-30370900-1393402460_thumb.jpg

Edited by Whatskid
Link to comment
https://www.sau.com.au/forums/topic/439795-25det-vctcasz32r32-duck-tail/
Share on other sites

I'll take the s2 vtc solenoid, im from Spain i'll pay thq postage don't worry just let me see some pics of the solenoid, i need the one with the green connector on the loom, like the attached pic, let me know if its that one please

post-132185-0-78996100-1394248328_thumb.jpeg

Edited by Eclipsado

Green connector is coolant sensor champ vct is the black one to the left of it

i know it, i was making reference to the connector on the loom for this type of solenoid that its green and different from others simple 2 pin connector

you got this one?

Edited by Eclipsado

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...