Jump to content
SAU Community

Recommended Posts

Hi guys, got a few items up for grabs off a 99 S2 RS4. I also have some items that I am no longer going to fit onto my stagea as I’m going for a different look now.

1. Standard exhaust, full turbo back system with the usual scrape marks on covers. No holes in pipes only marks on covers, includes heat shields as picured. - $100.

post-31124-0-48064500-1393650311_thumb.jpgpost-31124-0-38229600-1393650345_thumb.jpgpost-31124-0-55729600-1393650367_thumb.jpgpost-31124-0-72459900-1393650428_thumb.jpg

2. HKS Cannon (Inlet 3.5" & outlet 4.5") pipe on the inlet was cut by previous owner, would come up good with a clean up. Brown spots you can see in the pics are from the rubber matting I had it wrapped in. - $60.

post-31124-0-97839000-1393650483_thumb.jpgpost-31124-0-27769000-1393650502_thumb.jpgpost-31124-0-92951500-1393650535_thumb.jpgpost-31124-0-83167300-1393650555_thumb.jpg

3. Front garnish for factory front bar, fibreglass. Origionally bought this for my factory bar but decided to go with a different look. Only been dry fitted, in original condition and packaging. - $140

post-31124-0-34765500-1393650592_thumb.jpgpost-31124-0-94648900-1393650637_thumb.jpgpost-31124-0-44861200-1393650681_thumb.jpgpost-31124-0-85015600-1393650709_thumb.jpgpost-31124-0-00775000-1393650761_thumb.jpg

4. Rear garnish for Dayz Bar, again origionally bought this for my factory bar but decided to go with a different look. Came with some damage to the exhaust cut-out which has been repaired, I have given the whole thing a rough sand back. Comes with all mounting hardware. - $180

post-31124-0-49212600-1393651383_thumb.jpgpost-31124-0-10508200-1393651416_thumb.jpgpost-31124-0-69161600-1393651442_thumb.jpgpost-31124-0-03020800-1393651472_thumb.jpgpost-31124-0-74464900-1393651501_thumb.jpgpost-31124-0-23228000-1393651517_thumb.jpg

I have attached a couple of pics of when I had it taped to my rear bar to measure up mounting holes. post-31124-0-41649900-1393651537_thumb.jpgpost-31124-0-09179400-1393651625_thumb.jpg

5. Stock Stagea rims with tyres. Rims are in fair condition with some scuff marks visible in the pics below. Tyres; 2 at 10% and 2 at 80%. - $450

post-31124-0-13863700-1393719462_thumb.jpgpost-31124-0-95259800-1393719497_thumb.jpgpost-31124-0-34772700-1393719517_thumb.jpgpost-31124-0-30962400-1393719540_thumb.jpgpost-31124-0-57266100-1393719563_thumb.jpgpost-31124-0-64627500-1393719584_thumb.jpgpost-31124-0-28076600-1393719606_thumb.jpg

6. Auto Transmission, removed for manual conversion, comes with standard flywheel and torque converter. Box was serviced and valves were replaced prior to being removed. - $250

post-31124-0-28181800-1393719702_thumb.jpgpost-31124-0-50939900-1393719746_thumb.jpgpost-31124-0-04395100-1393719804_thumb.jpgpost-31124-0-54035100-1393719850_thumb.jpgpost-31124-0-72008900-1393719886_thumb.jpgpost-31124-0-73672400-1393719923_thumb.jpgpost-31124-0-49549500-1393719958_thumb.jpg

7. Plastic console surround and Tiptronic Auto selector. Removed when I had it converted to manual. - $50

post-31124-0-31284900-1393720059_thumb.jpgpost-31124-0-46000000-1393720101_thumb.jpg

All items are located in Wentworthville, contact me on 0433 147 729 for more details.

Local pick up preferred

Link to comment
https://www.sau.com.au/forums/topic/439954-fs-s2-stagea-parts-sydney/
Share on other sites

  • 3 weeks later...
  • 1 month later...

The following items are still available...

1. Standard exhaust, full turbo back system with the usual scrape marks on covers. No holes in pipes only marks on covers, includes heat shields as picured. - $100.

attachicon.gif20140222_150836.jpgattachicon.gif20140222_150813.jpgattachicon.gif20140222_150800.jpgattachicon.gif20140222_150737.jpg

2. HKS Cannon (Inlet 3.5" & outlet 4.5") pipe on the inlet was cut by previous owner, would come up good with a clean up. Brown spots you can see in the pics are from the rubber matting I had it wrapped in. - $60.

attachicon.gif20140222_150907.jpgattachicon.gif20140222_150856.jpgattachicon.gif20140222_150913.jpgattachicon.gif20140222_150921.jpg

3. Front garnish for factory front bar, fibreglass. Origionally bought this for my factory bar but decided to go with a different look. Only been dry fitted, in original condition and packaging. - $140

attachicon.gif20140222_150423.jpgattachicon.gif20140222_150604.jpgattachicon.gif20140222_150618.jpgattachicon.gif20140222_150631.jpgattachicon.gif20140222_150701.jpg

5. Stock Stagea rims with tyres. Rims are in fair condition with some scuff marks visible in the pics below. Tyres; 2 at 10% and 2 at 80%. - $450

attachicon.gif20140222_160536.jpgattachicon.gif20140222_160553.jpgattachicon.gif20140222_160558.jpgattachicon.gif20140222_160604.jpgattachicon.gif20140222_160610.jpgattachicon.gif20140222_160353.jpgattachicon.gif20140222_160402.jpg

7. Plastic console surround and Tiptronic Auto selector. Removed when I had it converted to manual. - $50

attachicon.gif20130126_144106.jpgattachicon.gif20130126_144112.jpg

All items are located in Wentworthville, contact me on 0433 147 729 for more details.

Local pick up preferred

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...