Jump to content
SAU Community

Recommended Posts

Hi guys, got a few items up for grabs off a 99 S2 RS4. I also have some items that I am no longer going to fit onto my stagea as I’m going for a different look now.

1. Standard exhaust, full turbo back system with the usual scrape marks on covers. No holes in pipes only marks on covers, includes heat shields as picured. - $100.

post-31124-0-48064500-1393650311_thumb.jpgpost-31124-0-38229600-1393650345_thumb.jpgpost-31124-0-55729600-1393650367_thumb.jpgpost-31124-0-72459900-1393650428_thumb.jpg

2. HKS Cannon (Inlet 3.5" & outlet 4.5") pipe on the inlet was cut by previous owner, would come up good with a clean up. Brown spots you can see in the pics are from the rubber matting I had it wrapped in. - $60.

post-31124-0-97839000-1393650483_thumb.jpgpost-31124-0-27769000-1393650502_thumb.jpgpost-31124-0-92951500-1393650535_thumb.jpgpost-31124-0-83167300-1393650555_thumb.jpg

3. Front garnish for factory front bar, fibreglass. Origionally bought this for my factory bar but decided to go with a different look. Only been dry fitted, in original condition and packaging. - $140

post-31124-0-34765500-1393650592_thumb.jpgpost-31124-0-94648900-1393650637_thumb.jpgpost-31124-0-44861200-1393650681_thumb.jpgpost-31124-0-85015600-1393650709_thumb.jpgpost-31124-0-00775000-1393650761_thumb.jpg

4. Rear garnish for Dayz Bar, again origionally bought this for my factory bar but decided to go with a different look. Came with some damage to the exhaust cut-out which has been repaired, I have given the whole thing a rough sand back. Comes with all mounting hardware. - $180

post-31124-0-49212600-1393651383_thumb.jpgpost-31124-0-10508200-1393651416_thumb.jpgpost-31124-0-69161600-1393651442_thumb.jpgpost-31124-0-03020800-1393651472_thumb.jpgpost-31124-0-74464900-1393651501_thumb.jpgpost-31124-0-23228000-1393651517_thumb.jpg

I have attached a couple of pics of when I had it taped to my rear bar to measure up mounting holes. post-31124-0-41649900-1393651537_thumb.jpgpost-31124-0-09179400-1393651625_thumb.jpg

5. Stock Stagea rims with tyres. Rims are in fair condition with some scuff marks visible in the pics below. Tyres; 2 at 10% and 2 at 80%. - $450

post-31124-0-13863700-1393719462_thumb.jpgpost-31124-0-95259800-1393719497_thumb.jpgpost-31124-0-34772700-1393719517_thumb.jpgpost-31124-0-30962400-1393719540_thumb.jpgpost-31124-0-57266100-1393719563_thumb.jpgpost-31124-0-64627500-1393719584_thumb.jpgpost-31124-0-28076600-1393719606_thumb.jpg

6. Auto Transmission, removed for manual conversion, comes with standard flywheel and torque converter. Box was serviced and valves were replaced prior to being removed. - $250

post-31124-0-28181800-1393719702_thumb.jpgpost-31124-0-50939900-1393719746_thumb.jpgpost-31124-0-04395100-1393719804_thumb.jpgpost-31124-0-54035100-1393719850_thumb.jpgpost-31124-0-72008900-1393719886_thumb.jpgpost-31124-0-73672400-1393719923_thumb.jpgpost-31124-0-49549500-1393719958_thumb.jpg

7. Plastic console surround and Tiptronic Auto selector. Removed when I had it converted to manual. - $50

post-31124-0-31284900-1393720059_thumb.jpgpost-31124-0-46000000-1393720101_thumb.jpg

All items are located in Wentworthville, contact me on 0433 147 729 for more details.

Local pick up preferred

Link to comment
https://www.sau.com.au/forums/topic/439954-fs-s2-stagea-parts-sydney/
Share on other sites

  • 3 weeks later...
  • 1 month later...

The following items are still available...

1. Standard exhaust, full turbo back system with the usual scrape marks on covers. No holes in pipes only marks on covers, includes heat shields as picured. - $100.

attachicon.gif20140222_150836.jpgattachicon.gif20140222_150813.jpgattachicon.gif20140222_150800.jpgattachicon.gif20140222_150737.jpg

2. HKS Cannon (Inlet 3.5" & outlet 4.5") pipe on the inlet was cut by previous owner, would come up good with a clean up. Brown spots you can see in the pics are from the rubber matting I had it wrapped in. - $60.

attachicon.gif20140222_150907.jpgattachicon.gif20140222_150856.jpgattachicon.gif20140222_150913.jpgattachicon.gif20140222_150921.jpg

3. Front garnish for factory front bar, fibreglass. Origionally bought this for my factory bar but decided to go with a different look. Only been dry fitted, in original condition and packaging. - $140

attachicon.gif20140222_150423.jpgattachicon.gif20140222_150604.jpgattachicon.gif20140222_150618.jpgattachicon.gif20140222_150631.jpgattachicon.gif20140222_150701.jpg

5. Stock Stagea rims with tyres. Rims are in fair condition with some scuff marks visible in the pics below. Tyres; 2 at 10% and 2 at 80%. - $450

attachicon.gif20140222_160536.jpgattachicon.gif20140222_160553.jpgattachicon.gif20140222_160558.jpgattachicon.gif20140222_160604.jpgattachicon.gif20140222_160610.jpgattachicon.gif20140222_160353.jpgattachicon.gif20140222_160402.jpg

7. Plastic console surround and Tiptronic Auto selector. Removed when I had it converted to manual. - $50

attachicon.gif20130126_144106.jpgattachicon.gif20130126_144112.jpg

All items are located in Wentworthville, contact me on 0433 147 729 for more details.

Local pick up preferred

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...