Jump to content
SAU Community

Recommended Posts

Selling my car.. No real rush at the moment, so not going to be taking any stupid offers. But it is for sale, for somebody who wants a skyline a cut above the rest.

For those that love to look at the pretty little pictures, here is plenty: http://www.gamebiz.com.au/other/r33/r33.html

1994 R33 GTS-T w/ 99,000km

EXTERIOR:

* 400R front bar

* D-Speed wing

* D-Speed sideskirts

* Rear pods

* 17x8 Zepter mags w/ 235/45 Falken ZE326 all round

* 400R style decals (removeable if thats not your thing)

* Factory sunroof w/ electric adjust

* Painted calipers

* Full 30% tint (darkest legal) quality Formula1 tint installed by Tint-a-Car

* Detailed/Polished engine bay

INTERIOR:

* Momo Commander steering wheel

* Razo sports pedals

* Nismo floormats

* Interior cathodes

* JVC S785 CD/MP3 face unit w/ remote

* Hertz HSK-165 6.5" splits (w/ active crossover) front (good speakers)

* Interior detailing in red

* Speco boost guage

* Razo turbo timer

* Insurance compliant alarm & Immoboliser w/ remote keyless entry

PERFORMANCE:

* HKS Type S intercooler - 600x300x60

* Trust ProfecB EBC (dual stage) - control boost inside cabin.

* Apexi S-AFC blue screen

* HKS front 3.5" dump pipe

* Hi-flow cat

* HKS Super Dragger II 3.5" cat-back exhaust

* Blitz LM pod filter

* Custom metal CAI box to house pod, and air feed from front bar

* Bosch 910 fuel pump

* Heavy Duty Excedy clutch

* HKS exhaust camgear

* GTR N1 water pump

HANDLING:

* CUSCO front tower strut bar

* Zeal Function B6 coilovers (height and damper adjust) - race spec

* Slotted/Drilled rotors

* Diff cradle bushes or pineapples for increased traction off the line

All the standard R33 goodies:

* HICAS (4WS)

* Power steering

* Electric mirrors

* Electric windows

* Digital climate control

Regularly serviced, and always taken care of. Receipts and original import papers.

Just had $1400 spent on 100,00km service - all belts, timing belt, idler & tensioner bearings replaced, water pump, cam gear installed, and radiator rebuilt.

*** ASKING $22K ***

Sale will include 6 months QLD rego, new rear tyres, and safety Certificate.

Currently capable of high 13sec 1/4 mile. With better rear tyres should do mid to low 13's. Fast car, very reliable, and definitely turns heads. Easily $10k worth of extras on there, and great base to take things further.

May be prepared to drive it to Sydney or NSW north coast for buyer who puts deposit on

No tyre kickers, will not separate separate components! If you are after pictures, well you can see them here: http://www.gamebiz.com.au/other/r33/r33.html Please don't waste my time unless you are SERIOUS and have the money. Thank you.

Phone: 0417 016 326

Email: [email protected]

PM: me

Link to comment
https://www.sau.com.au/forums/topic/43999-modded-r33-gts-t/
Share on other sites

I had some skirts ready to be fitted (in fact i used to have other sideskirts which i sold).. blah, blah but they didn't get fitted.

Anyhow.. $400 I can get the 400R skirts t-ed up for fitted and painted if somebody was interested.. If you can afford the car you can afford $400 I think :D

Link to comment
https://www.sau.com.au/forums/topic/43999-modded-r33-gts-t/#findComment-910407
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...