Jump to content
SAU Community

Diagram Needed Please

MJTru
 Share

Recommended Posts

MJTru Mentor

MJTru

Posted
Posted

Hi im looking for a pinout for my 1994 r33 rb20e (auto) tcm. This is the computer that's by the drivers kick panel. ( by the gas pedal)

I have looked everywhere and can't seem to find it.

What I'm really after is I want to know where the wires from the ecu (engine) sends the signals and what signals they are to the tcm.

I have the diagram for the ecu but there are some wires that just has an arrow going to "a/t control". Well that's all it says.

I have just done an rd28 to a rb20e swap in my 1994 laurel, it was a lot of work but the car runs, but I notice the shifting is only at around 3800 rpms. In short it only shifts by rpms. And if I let up it just won't shift up at all I have to get to 3800 rpms. This is using the rd28 wiring loom with the rb20e tcm. Also if I just go in the gas hard the car stops making power until I let up just a little. I have a feeling that the tcm needs these signals from the ecu along with the electronic kick down signal from the tps.

If i was to get the diagram I'm sure i would be able to figure it out.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/440010-diagram-needed-please/
Share on other sites
MJTru Mentor

MJTru

Posted
  • Author
Posted

I just down loaded the manual. But I can seem to find the pinout. I see that they are saying that some of these wires from the ecu goes to dt1 and dt2. This has to be my problem. Im so close.

Help please.

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...