Jump to content
SAU Community

Rb25/30Det Ecu Map Sensor/boost Gauge Lines Getting Oil In Them?

HR31-PASSAGE
 Share

Recommended Posts

HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
Posted

Ok guys i'm having an issue with my rb25/30 ecu map sensor & boost gauge lines are getting oil in them from the plenum. i'm not to sure if its blow by or my oil catch can putting oil through the intercooler piping, i have the catch can drained back to the sump & a line from the top on the can pluming into the turbo air intake (to prevent head pressure build up)

I have one of them mower fuel filters on the lines but oil is still getting through that! now is there another filter that will absorb the oil rather then letting it through the filter?

any help will be great

cheers

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Take the line off the intake and put it in a container and see how much oil it collects.

If it is filling with oil you need a better baffled catch can and /or a proper air/oil separator (not a mower fuel filter) either a Nismo item or a properly fabricated one.

If you are worried about excessive blow by get a leak down test.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Most women will agree that parking is the most taxing part of driving

      By PranK · Posted

      Go back and watch the video again... 
    • funkymonkey
      Most women will agree that parking is the most taxing part of driving

      By funkymonkey · Posted

      Are you meant to double fist them?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...