Jump to content
SAU Community

Fs: R33 Gtst Track Car And Trailer


MrFurious
 Share

Recommended Posts

My missus and I unfortunately need to sell our skyline to help build a house.

It is a 94 model, with dual airbags and active LSD, rare dark green/blue colour.

We let the registration lapse as it became a trailer queen, has a few mild modifications as it was a budget drift car.

From the outset we wanted the car to stay alive as long as possible, so it has been treated very well, especially for a drift car. Before we purchased it, the car was serviced at ERD, and work I couldn't do myself was done there too. Oil and filter changed after every event, and never run excess boost. The car was tuned at EFI to make max power (200rwhp) at 10 psi before even a hint of fuel pressure drop.

Mods:

Alloy radiator

Air-con removed

Strut bars front and rear

Suede deep dish steering wheel

Upgraded clutch

Lightened flywheel

Welded diff centre (ridiculously solid, nobody could break it)

Hicas lock bar

Active lsd set-up removed (pump, lines, etc)

rear camber arms

castor arms

front camber arms

BC coilovers 8kg, 6kg

usual bitsa exhaust

Advanti wheels 17x9 +15 x2

Rota wheels 17x9 +12 x4

Pod filter

Splitfire coil packs

Apexi PowerFC

Engine is in superb condition, as is the gearbox. The front bar has rub marks on the LH side from nudging a stack of tyres on the track.

Happy to take and send extra photos of anything specific you want to see.

Have all the stock parts as well.

Can register the car if serious buyer, and we can negotiate price difference.

The car trailer is solid, tows well, built new last year, has 6 months rego and has cable override breaks so limited to 2000kg GVM at the moment, easily upgraded with electric brakes.

Located in Toowoomba, can deliver to Brisbane, Gold Coast, North of Brisbane (depending on how far)

This is a great budget drift package

$8500 for car and trailer

or

Car $6500

and

Trailer $2500

PM or call/text 0 4 3 9 8 4 4 0 6 9

Trailer is the grey one with R34 wheels, in the background of pic 2

post-89407-0-16345100-1396264844_thumb.jpg

post-89407-0-38423300-1396264914_thumb.jpg

post-89407-0-58407100-1396265076_thumb.jpg

post-89407-0-41199700-1396265380_thumb.jpg

post-89407-0-17933200-1396265435_thumb.jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 4 weeks later...
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...