Jump to content
SAU Community

Recommended Posts

I have BMI DVD at home where S2000, WRX, RX8, V35, Integra R, and MX5 race around Tskuba(sp)... all cars are stock and the S2000 wins by a hair over the V35 Skyline. The WRX is third with its brakes fading, and the Integra R is 4th followed by the RX8 and then a country mile back to the MX5 in last place.

The V35 is very impressive coming from last place through the field to almost past the S2000 which had bolted at the start... one more lap and he would have got him... the RX8 handles well but not enough grunt... the V35 out handles them all!!!

Link to comment
https://www.sau.com.au/forums/topic/44135-g35v35-videos/#findComment-903173
Share on other sites

I have BMI DVD at home where S2000, WRX, RX8, V35, Integra R, and MX5 race around Tskuba(sp)... all cars are stock and the S2000 wins by a hair over the V35 Skyline. The WRX is third with its brakes fading, and the Integra R is 4th followed by the RX8 and then a country mile back to the MX5 in last place.

The V35 is very impressive coming from last place through the field to almost past the S2000 which had bolted at the start... one more lap and he would have got him... the RX8 handles well but not enough grunt... the V35 out handles them all!!!

yep, i downloaded this clip. i'll have a search around for the dl later for you guys

Link to comment
https://www.sau.com.au/forums/topic/44135-g35v35-videos/#findComment-903753
Share on other sites

plan on taking some amutur vids in the near future, but i'll have to get them hosted? took one the week end to test my new camcorder and bracket i made... just of the speedo on a 0-60 launch. I was on a public road so just did the one.

On replay I timed 4.9 secs. maybe not the most scientific/acurate but it proved one thing.... I need to practice my technique :);)

Link to comment
https://www.sau.com.au/forums/topic/44135-g35v35-videos/#findComment-903819
Share on other sites

ask christian if you can host them on sau, if they're not too big.

edit: i found the video on my puter. the name of the file is ' g35zm3 '. it's 79mb. cannot find the original place i got it from but search google with the name and you'll see places to dl.

Link to comment
https://www.sau.com.au/forums/topic/44135-g35v35-videos/#findComment-903912
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...