Jump to content
SAU Community

FS Unichip + EBC and HKS EIDS

EnricoPalazzo
 Share

Recommended Posts

EnricoPalazzo Grand Master

EnricoPalazzo

Posted
Posted

HKS EIDS

HKS idle Stabilizer. Helps solve the stalling problem caused by most ATMO BOVs.

Comes with Computer, Loom and Instructions.

PriceSOLD (UAS have one for $280)

Buyer buys postage from SA. Prefer Direct Deposit, COD maybe.

in excellent cond.

Thanks, Dean

Link to comment
https://www.sau.com.au/forums/topic/44218-fs-unichip-ebc-and-hks-eids/
Share on other sites
EnricoPalazzo Grand Master

EnricoPalazzo

Posted
  • Author
Posted

calemb : If uve ever installed a car stereo, then u can easily install this. U need to tap into only 8 wires. Took me 10 mins to install.

Yes it works on autos

Yes it works with other EBCs however it works as good if not better then the brand name ones. Buy this, and sell the brand name one if u r happy with it, and u saved urself a shitload. :)

EnricoPalazzo Grand Master

EnricoPalazzo

Posted
  • Author
Posted

Pics Finally,

Sorry about the crapness of them, my camera isnt workin so i had to use my el crappo one.

Pics are Unichip and Boost controller Modules

Wiring loom pic of boost controller and Unichip (Still attached to my car)

Thanks

Dean

JAMESW Proficient

JAMESW

Posted
Posted

read this link... it tells you why you should install a unichip intto your car.

http://www.airpowersystems.com.au/unichip/unichip.htm

The Unichip not only enhances power and torque across all throttle positions throughout the entire rev range, but significantly enhances throttle response, driveability, fuel economy and outright acceleration.

gtr_rb26.gif

James.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 engine swap Rb25de neo to s1 Rb25det

      By GTSBoy · Posted

      THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
    • GTSBoy
      Factory oil temp sensor in a RS4V without gauges?

      By GTSBoy · Posted

      Light should be a pressure switch, not a sensor.
    • Duncan
      Factory oil temp sensor in a RS4V without gauges?

      By Duncan · Posted

      The pressure light likely has a different sender to a pressure gauge, its been too long for me to remember for sure. Just have a look for another sender down near the oil filter. If you are confident in your rewired pressure sender reading correctly, you can be pretty sure it is just the dash light's sender failing, it is a pretty common thing.
    • Duncan
      C34 RSFour V Build in the US

      By Duncan · Posted

      It would be nice to see the result, but instagram is a click too far
    • Duncan
      S1 headlights?

      By Duncan · Posted

      That is a series 1 front end (grill, bumper, headlights). I'm not sure if you are trying to confirm if your whole car is series 1 or just the headlights, but the build date and vin# on the plaque in the engine bay would be the best reference for what it was when it left the factory (noting a lot may have changed over the years)
×
×
  • Create New...