Jump to content
SAU Community

Greddy/trust Geniune Td06Sh 25G 8Cm Complete Kit Rb

perzn_34
 Share

Recommended Posts

perzn_34 Experienced

perzn_34

Posted
Posted

Hey guys for sale is my GENUINE Trust/Greddy TD06SH 25G 8cm (responsive). This comes with the whole kit including the

Greddy turbo

Greddy exhaust manifold

Greddy external waste gate

Greddy dump pipe

Greddy exhaust housing heat shield

4inch intake

All the braided lines and fittings

All gaskets and bolts

This is an outstanding setup, all made to work together for best performance. The compressor housing is professionally sprayed black for stealth and a neat look.

Its still fitted to the car so u can come test it before i get it removed. Its seriously an awesome turbo kit for the rb engines.

For fitting you can just unbolt the manifold from the head and unbolt the dump form the rest of the exhaust and drop it in your engine. CANT get more bolt on that this.

Its don't very little work. Was installed march 2013 when the whole car got built and only had 5-7000km on the motor on street, was more of a show car.

Made a very strong 320rwkw on 18psi. Easy 360+ on e85.. Not for the faint hearted i should say

Only reason for sale is that I'm going a different direction with the whole car and motor.

Asking $3500 (brand new retails close to 7k) … grab a bargain

contact Andrew on 0450232121

Melbourne but can't post very cheap

Also have a matching intercooler and piping, and also a 3.5 inch HKS exhaust for sale too if your interested. All already on the car and can be tested.. Get in before i remove them :)

post-72334-0-84654700-1399046565_thumb.jpg

post-72334-0-33148500-1399046573_thumb.jpg

post-72334-0-39467700-1399046718_thumb.jpg

dorifticon Community Regular

dorifticon

Posted
Posted (edited)

Hey mate I take it this is for an RB26dett cylinder head?

I'm currently running a rb30dett setup in an r32 GTR and looking to go to single turbo.

Currently running 22psi with twin HKS 2530's.

couple questions:

1) will this fit r32 GTR?

2) can you post a pic of the turbo installed in the engine bay - want to get an idea of clearances because my cylinder head is sitting 38mm higher. Ideally, can you post a pic of the height of the turbo/plumbing relative to the height of the rocker covers? (ie like the photo you have but from a lower angle, it's hard to tell how high the turbo sits)

3) does this include some kind of dump/front pipe setup to connect up to the stock cat converter position?

4) what is the diametre of the outlet on the turbo? Does it have some way to connect to the stock intercooler setup?

Edited by dorifticon
  • 2 weeks later...
  • 9 months later...
  • 1 year later...
perzn_34 Experienced

perzn_34

Posted
  • Author
Posted

Back up for sale again.

Kit now includes:

Greddy turbo (8cm rear housing)

Greddy exhaust manifold

Turbosmart Hypergate45mm external waste gate

Greddy dump pipe

Greddy exhaust housing heat shield

All the braided lines and fittings

All gaskets and bolts

Now fitted to my r34 gtt and still in the car so if you are early you can get a test drive. Making 322rwkw on 18psi on BP98

Reason for sale is going bigger turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...