Jump to content
SAU Community

Leftover Bits And Peices From My 33 Gtst (Morayfield)

boiracer

By boiracer,
in Classifieds

 Share

Recommended Posts

boiracer Grand Master

boiracer

Posted
Posted

Hi guys, I'm wanting to offload the rest of my remaining skyline bits from my 33 GTST S2. all prices other than the clutch are negotiable...I just want it gone so I have room for more stuffs.

Exceedy sports tuff clutch kit, brand new unused with new spigot bearing $350

New non genuine NISSAN center caps, 54mm suit GTR wheels, and 32 stockos (i think) $20

Full stock exhaust, with dump and all heat shielding. $80

Stock struts, still complete and reasonable condition $100

Stock I/C with under bumper pipework $50

New factory Nissan bonnet rubber stops $15

Stock control arms with superpro bushes. I got these for free, so I'll give them away for free. Feel free to buy something else while your at it :P

Pivot brand turbo timer $15

set of stock wheels GC with OK rubber (camber wear) $100?

And a few non skyline specific parts

splitfire mechanical oil pressure gauge, brand new with fittings. $30

FM band expander. $10

post-62717-0-38993200-1399427117_thumb.jpg

post-62717-0-97023900-1399427150_thumb.jpg

post-62717-0-60720900-1399427172_thumb.jpg

post-62717-0-45105700-1399427206_thumb.jpg

post-62717-0-09092900-1399427221_thumb.jpg

post-62717-0-81581300-1399427259_thumb.jpg

post-62717-0-77131000-1399427302_thumb.jpg

post-62717-0-28793800-1399427329_thumb.jpg

post-62717-0-26578300-1399427348_thumb.jpg

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • funkymonkey
      Most women will agree that parking is the most taxing part of driving

      By funkymonkey · Posted

      Are you meant to double fist them?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...