Jump to content
SAU Community

Recommended Posts

Hey everyone. In the last few days I acquired a 2003 Stagea NM35 250t RX to keep my '89 Silhouette company ...so i'm a newb to turbo engines and imports ...can't believe how much of a pain the stock Bose system is to repair/replace! ...Anyway, I have noticed rough idle/surging at startup combined with black smoke from exhaust for up to 5 minutes when cold and also after sitting for a few hours ...within 10 minutes the surging subsides ...could it be an oil seal somewhere? It feels like it's going to stall but doesn't. Love my Nissans but in no way a mechanic, though not afraid to give repairs a go. Have already scoured the forums and internet for possible solutions but haven't seen the exact same issue yet ...any ideas anyone? Thanks!!

Link to comment
https://www.sau.com.au/forums/topic/443647-nm35-surging-idle-at-startup/
Share on other sites

Hey Lom, welcome mate.

These are fairly complicated cars to work on, for most maintenance you will need a scanner to diagnose, especially handy with faults like yours. I would start with making sure the revs are correct, it could help with the stalling to clean the throttle, but be aware, don't move the throttle plate when you do.

Have you checked the plugs at all? What mods have been done? Havs the engine light been on at all?

Probably best to get it checked over by someone who is familiar with the M35, there are a few common faults to look over which most have by now. Things like sway bar links, compression rod bushes, passenger side rocker gaskets and others will most likely need replacement if they haven't been done already. Where are you located?

  • Like 1

Hey Scotty, thanks for your welcome and advice! No mods have been done by me, though i think the previous owner had changed the exhaust. No engine lights have been on at all and haven't checked plugs yet though it was serviced a few days before I purchased - haven't had it even for a week ...tbh, compared to the R31, the engine bay is quite overwhelming! The issue only occurs when the engine has cooled. I'm in Melbourne's northern suburbs ...happen to know of anyone who knows their way around the M35? Cheers mate

You are welcome to bring it down here, i'm in Hampton Park.

Is it something you can get fixed under statutory warranty I wonder? I would be pretty pissed buying a car with problems. Was it through a dealer?

Cheers Scotty, i appreciate it mate ...i have a warranty so i'll give the dealer a call ...was hoping it'd be something simple that i'd missed in my extensive searching that i could fix myself ..aside from this issue, drives well as far as i can tell once engine warm ...but you got me worried now haha

Just a quick update for those interested, had the local mechanic hook it up to the scanner and no errors/faults were detected ...this may be because the engine was warm so will be leaving it overnight next week so he can start when cold ...thinks it's most likely the throttle body that needs a clean as Scotty has already mentioned

Edited by lom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...