Jump to content
SAU Community

Recommended Posts

Being a new R32 GTS-T owner (as well as it being my first turbo car). I have heard people talking about warming up & cooling down the turbo...

Being new to turbo cars, I just want to make shoure I am not going to stuff it up.

My R32 is stock (except exhust) and I was wondering about the do's & dont's with warming up & colling down with turbos. With a stock setup is it a big deal or is it when you have high performace parts on the car?

Reece

Link to comment
https://www.sau.com.au/forums/topic/44449-warming-up-cooling-down-turbos/
Share on other sites

when you drive a turbo car hard under boost it gets extremly hot ie the whole rear part of the turbo glows red so you should let i cool down when you have thrashed it also driving it quitely for 2 mins before turning it off will suffice.

meggala

this is an idea of how hot they get disreguard the writing.

drbanner.jpgs

For the past ~2.5years of owning my 32 i've never really warmed it up or cooled it down.

Warming up.

It idles for the amount of time it takes for me to put on my seat belt, put the cd players face on & put my wallet in the glovebox.

I then drive it real easy until it is at operating temp. I then drive it normally until ~10km's later from initial startup. It takes around 1-2km's to reach operating temp.

Only after then do I give it some stick if I am going to.

Cooling down.

I havn't got a turbo timer and don't really see the need for one, especially when you consider the possible insurance and defect hassles.

Before you turn the car off just take it easy for the last few km's.

Then let it idle for the amount of time it takes to grab your wallet, take the seat belt off etc.

If I have really been giving it a heap (can smell the brakes etc still) I let it idle for 2 or so mins.

General driving with the odd little bit of stick I don't worry about cooling the car down, just make sure turning the car off is the last thing you do. This will give time for the turbo to spool down.

Only once I have turned the car off just after coming off boost. The nasty sound of the turbo spinning was enough for me to instantly start the car and wait a minute or so.

It seems the ol' turbo's being water cooled and oil cooled are quite tough items these days. I've been pumping quite a bit of boost through it for some time and it still hasn't broke. :) I don't race or give the car a hard time or do high speed high boost long stints.

Out of all my cars this 32 has been THE most reliable out of them all.

Driveline, diff, motor everything is tough, and thats comparing it to a VS V8 5speed that are 'supposed' to have tough gearbox's. Mine still broke within 6months, then the diff then the rear subframe and the list goes on. :D

I've got a $0 bodgy way to increase boost if your interested.

You have to be carefull though. :)

Elongate the wastegate actuator bracket bolt up holes. Then pull the wastegate actuator and bracket back tightening it up. (Pull the wastegate actuator towards the front of the engine) Then tighten up the two bolts.

You then need to take it for a drive and fine tune the adjustment so it doesn't over boost.

Thanks for the info, it has help to clear some things up for me.

Since I dont drive it hard (all that much) there isnt much i need to do. Except make shoure it has warmed up before driving it hard, andif I have been riving it hard to take it easy before I pull in the driveway.

Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...