Jump to content
SAU Community

Recommended Posts

So I went through my shed and realized I have a lot of gear that I no longer require. So come grab a bargin!


IMG_7722_zps9155cf21.jpg


IMG_7723_zps202900df.jpg


1. S15 front calipers, pads and rotors

Plenty of meat

$180


IMG_7725_zps7c84fd28.jpg


2. R33 5 stud front knuckles

Stock, cut them up and get more lock or put on your NA skyline

$50


IMG_7726_zps94c928c1.jpg


3. R33 GTST drivers side front caliper

No pads, was working fine when pulled off the car

$40


IMG_7727_zpsd8aa319a.jpg


4. R33 GTST rear knuckle

Passenger side, complete with drum assembly

$40


IMG_7728_zps54d29c70.jpg


5. RB20 engine mounts

use these to get a RB in your S chassis (along with a RB20 crossmember)

$50


IMG_7729_zps5e0f50a8.jpg


6. 350mm Big end steering

Fruity candy gold steering wheel from Japan

$220


7. 52mm Racetech gauges

consists of water temp, oil temp and oil pressure. Comes with all wiring, sensors, gauge cups and a DIN panel.

Second image is an example of what they look like lit up.

SOLD!


IMG_7733_zps3a18ace6.jpg


8. 60mm gauge cups

$15 each


IMG_7734_zpsecbc5462.jpg


9. RB coil pack covers

$30 each


IMG_7735_zps7ef9e1a8.jpg


10. GKtech solid steering bush

For S13/180/R32

$20


IMG_7736_zpsbe693ff4.jpg


11. GKtech R32 silicone radiator hose with water temp sensor provision

$40


IMG_7737_zpsed6726ee.jpg


12. R200 welded diff out of a S15

3.8 final drive, 3x2 half shafts

$200


IMG_7738_zps52dd83a5.jpg


13. GKtech handbrake cover

Suit R32/33/34

$25


IMG_7739_zps67b1d13d.jpg


14. 52mm gauge DIN slot

$20


IMG_7740_zps1b169c5c.jpg


familyreunion_zps52f2ce65.jpg


15. Stagea M35 rear wiper

Good upgrade for C34 Stagea

$60


IMG_7741_zps890b3043.jpg


16. R33 Skyline airbox

may suit R32/R34

$80


20140626_212529_zpsa815036a.jpg


1618423_10152002247733613_503826661_n_zp


17. Custom blast pipes suit S15

painted black, look good and designed for S15 bumpers

$220




18. Roof racks, mount to roof rails

Will suit cars like Stagea, imprezza wagon, rav 4 etc.

SOLD!


19. Kinugawa TD06SL2 20G 8cm

Its T2 flange and will bolt up to standard dump pipe. It's roughly 2000kms old and made 240kw on 18psi.

No longer avaliable


IMG_7724_zpse6de8b4a.jpg


20. Sard 550CC injectors complete in S15 fuel rail

Has collars, and wiring loom to plug into standard plug. Straight swap for standard units.

$350


IMG_7745_zps34a4267d.jpg


21. Apexi pod filter

Suits RB20/RB25 as it bolts up to their AFMs

$30


IMG_7746_zpse9201bdd.jpg


22. Brake master cylinder stopper

Suits R33/R34/Stagea

$40


IMG_7749_zpsbf070bf3.jpg


23. Muteki black steel tuner nuts

12x1.5 thread pitch

Suits Hondas/Mazdas etc

SOLD!


20140626_212224_zps61e0f61e.jpg


24. R33 coupe rear bumper

Factory white, ok condition paint is meh.

$40


20140626_212231_zpscc27a068.jpg


Paulies-R33.jpg


25. R33 Koni rear shocks and king springs all round

Stock shocks up front

Ride well, lower the car a litte. Good for clearing defects or replacing your blown units

Image above shows how the 33 sat.

$250


26. R33 front LCAS

$50 pair



27. RB25/R33 cross member

Use it to get a RB in your S chassis

$60


20140622_182008_zpsec46e135.jpg


28. 10 row oil cooler relocation kit with Aeroflow lines/fittings


I have this kit off my Stagea that I sold recently. It's a 10 row oil cooler, with oil filter relocation. The lines have been changed for Aeroflow units, along with the fittings.


Was mounted on the drives side area as seen in the first pic.


Great condition, a little dirty but that's about it.


Will suit RB20/25/26/30 and anything else with 3/4 thread pitch. Will have a M20x1.5 adaptor soon to suit SR and other engines.


$350 ono



Located in Hoxton Park region, happy to ship items at buyers expense.


Get me on 0490 169 671 SMS only, can't pick up calls during work.


Cheers,


Adam.

Edited by Run-It-Hard
  • 2 weeks later...

Hi, i found below websites which manufacturer supiriour quality of pipe fittings which are mainly use for car parts please check below..

http://www.rajendrafittings.com/ or http://www.kalikundsteel.com/ and http://www.gurugautam.com/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...