Jump to content
SAU Community

Recommended Posts

I've listed a new ad as some parts have changed and the price/pics have been updated to reflect this. I have found a car that I wish to purchase as a replacement so take a look!

Everything works well, A/C is cold & the car is mechanically fantastic. It has been modified to drive like a standard car with usable power. The body has some blemishes but overall it is in great condition. Please note the car will be sold with 17" Impul rims. I will also include various stock parts such as exhaust etc for an easy RWC which can be arranged.
Car: 1998 Toyota Chaser JZX100
Transmission: Factory 5MT
KM: 126xxx
Registration: Valid until May 2015
Colour: 6n9
Price: $18,000
Location: Melbourne VIC
Contact: Michael 0424 141 211
Maintenance
100k service & general services completed
New OEM diff bushes
New clutch master & slave cyls
Mods
Power
Blitz K1-450V Turbo w/HKS Actuator
Blitz FMIC
Denso 850cc injectors
Walbro 255LP/H fuel pump
Trust DD twin pipe exhaust
Koyorad 2layer copper radiator
TRD Radiator cap
Action Stage 3 clutch
HKS F-Con V Pro V3.14 ECU w/3Bar map sensor
Tuned by Trent @ Chequered Tuning. Makes over 240RWKW & 470NM of torque by 3200RPM
Brakes/Susp
Znoelli slotted front rotors & pads
Tanabe coilovers
TRD sway bars
Tom's triangle brace
Interior/Exterior
OEM lip kit & weathershields
Clear side indicators
Clearworld smoked corner indicators
TRD gear knob
Stereo with alpine head unit/amp/speakers
Mongoose M80G 3pt immobilizer/alarm/keyless entry
Pics
2doztj.jpg
6hi6ae.jpg
2e4ydld.jpg
20sc51d.jpg
2jb1hjr.jpg
2zfiq9w.jpg
1zv615y.jpg
292lbp5.jpg
ip84di.jpg
29dtmqu.jpg
aw5y1.jpg
a3jgap.jpg
utpqs.jpg
206bqqx.jpg
2hhgehf.jpg
Edited by discern
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Price drop! Car is now for sale with the basic bolt-ons (coils, cat-back, fmic, rad, trd bits) for $16,000 !!

Would make a great daily drive/weekend fun car being 5mt stock-ish comfortable etc :)

Edited by discern
  • 5 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...