Jump to content
SAU Community

Fs: Act/canberra - Rb20Det Complete Engine, Wheels, Coilpacks

StinkyPoo
 Share

Recommended Posts

StinkyPoo Mentor

StinkyPoo

Posted
Posted

Forsale is the RB20DET from my R32 4 door - $700



The engine was mated with a auto box and still has the flex plate on it. Comes with things such as the turbo, computer, coilpacks, loom, CAS . Was running in my car until I took it out and swapped it for a manual setup from another car. It looks like the wiring loom might have had a piggy back but that was before I owned it. The kms on the Dash is around 200,000 however this is not the original engine.



The engine is out and ready to go. I can put it on a pallet if it needs to be shipped.



--------------------------------



I also have some wheels forsale



A set of 4x 17x8 (I don't know offset), 5x114.3 - I bought them as track wheels, never used them and have since upgraded to wider wheels. Comes with tyres - $300



A set of 4x 16x7? (I don't know offset), 5x114.3/100? - They are Sparco multi-spoke design. Came with my 4 door but I don't need them. I'll try to find tyres for them - $200




---------------------------------



RB20DET Coilpack - set of 6



Again, this came as a spare with my R32 but I already have splitfires so I don't need them - $100


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tidi0x
      Wheel Sizes & Offsets For Skylines

      By tidi0x · Posted

      Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...