Jump to content
SAU Community

Bride \ Recaro Express Group Buy #2 "replica" Seats Carbon , Kevlar ,frp ,glitter


Recommended Posts

suwidji : Vios III is fixed back , The one you linked is a low max style with plain cloth. Universal rails are not direct bolt on as you need the mounts customized.

Can I grab a Bride Low Max Gias 2 Black back with the Normal Bride Gradiation like in photo 5 and standard size.

Please and thanks. Also need my sent to Brisbane not Sydney. :)

Longz : Bride Stradia Alcantara , Bride Low Max Gias Alcantara

smg084: Stradia 2 Sport Style-frp
lokiR33 : BRIDE STRADIA II - FRP Black

Jezr: Bride Stadia II Maizora Graduation Fabric

BLK-51N : Bride low max gias 2 FRP back in black gradation standard size

green180sx : Bride Low Max Gias 2 - Kevlar purple stitching black floral writing **

Abdul11 : Bride Vios III FRP Red -

Cxxo : Bride Low Max Gias 2 Black back with the Normal Bride Gradiation **

  • 2 weeks later...

First round of seat's will be ending soon.

I am currently in talks still in regards to the XL seat's which will be sent in a 2nd lot.

Will keep this thread updated.

Bride ViosIII - Glitter (XL Size)

Bride ViosIII - FRP (XL Size)

Bride ViosIII - Carbon (XL Size)

Bride ViosIII - Kelvar (XL Size)

BRIDE VIOS III - GLITTER Black Alcantara (XL Size)

BRIDE VIOS III - FRP Black Alcantara (XL Size)

BRIDE VIOS III - Carbon Black Alcantara (XL Size)

BRIDE VIOS III - Kelvar Black Alcantara (XL Size)

BRIDE VIOS III - VENUS Black Alcantara (XL Size)

Bride StradiaII - Glitter (XL Size)

Bride StradiaII - FRP (XL Size)

Bride StradiaII - Carbon (XL Size)

Bride StradiaII - Kevlar (XL Size)

BRIDE STRADIA II - GLITTER Black Alcantara (XL Size)

BRIDE STRADIA II - FRP Black Alcantara (XL Size)

BRIDE STRADIA II - Carbon Black Alcantara (XL Size)

BRIDE STRADIA II - Kelvar Black Alcantara (XL Size)

BRIDE STRADIA II - VENUS Black Alcantara (XL Size)

Price's should be similar to the normal ones just about $50-60 extra per set i can get the exact amount when order is going in as they take USD and our $ is terrible.

^ im bad at econonics but can you explain wtf is going on ? We were at 94c how did it drop to 88c and going a futher 3c lower? Will we ever recover

Haha I'm not that good at it and I don't know why. I just keep a eye on it for work, mainly hear stuff through my boss as I work at a timber importing company, and basically everything we import is based around the dollar.

Its hard to follow unless your heavily involved as all sorts of things affect it.

I can tell you that timber products (decking mouldings etc) are about to go up. haha

Edited by Cxxo
Guest
This topic is now closed to further replies.



  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...