Jump to content
SAU Community

(Nsw) R33 30/25 Combo Built Auto Box And More


Recommended Posts

On offer is a 3000km old re401a 4 speed box built and supplied by gzm automotive with all the upgrades. Comes complete with all wiring, b&m quick shifter, 3500rpm stall converter, Flex plate, external cooler and drive shaft to suit skyline r33. box will bolt up to rb30 block. I was running it in a r33 with 30/25 combo for a very short time with only 240kw/atw. In as new condition. Built to handle over 350kw/atw. I payed over $4500 for the setup going for a fraction of the price! It is a full manulised auto with 4th gear on a switch, was the other option to a C4 setup for $9000.

Asking $3000

I also have the complete motor I was running but was pulled out due to blown bottom end...

Will strip sell in parts or complete.

25/30 combo with...

Nistune ecu (was just tuned with reciepts $750)

Less than 10k old twin garret gt2560r turbos with manifold to fit rb25 head ($2600 worth with polished rb26 intake)

Complete exhaust including dump pipes (mostly stainless) and custom 02 sensors with inovate lc1 to suit.

All pipe work including fmic, bov and z32 afm.

Rb25 head complete with adjustable cam gear etc.

Blown forged rb30 bottom with less then 20k pistons may be ok but im uncertain.

Custom plenum, fuel rail with 550cc injectors. 65mm Throttle body, catch can, few other bits and pieces.

Asking $4000 for the motor with all bolt ons or make offers on parts seperatly.

Located penrith nsw

Link to comment
Share on other sites

On offer is a 3000km old re401a 4 speed box built and supplied by gzm automotive with all the upgrades. Comes complete with all wiring, b&m quick shifter, 3500rpm stall converter, Flex plate, external cooler and drive shaft to suit skyline r33. box will bolt up to rb30 block. I was running it in a r33 with 30/25 combo for a very short time with only 240kw/atw. In as new condition. Built to handle over 350kw/atw. I payed over $4500 for the setup going for a fraction of the price! It is a full manulised auto with 4th gear on a switch, was the other option to a C4 setup for $9000.

Asking $3000

I also have the complete motor I was running but was pulled out due to blown bottom end...

Will strip sell in parts or complete.

25/30 combo with...

Nistune ecu (was just tuned with reciepts $750)

Less than 10k old twin garret gt2560r turbos with manifold to fit rb25 head ($2600 worth with polished rb26 intake)

Complete exhaust including dump pipes (mostly stainless) and custom 02 sensors with inovate lc1 to suit.

All pipe work including fmic, bov and z32 afm.

Rb25 head complete with adjustable cam gear etc.

Blown forged rb30 bottom with less then 20k pistons may be ok but im uncertain.

Custom plenum, fuel rail with 550cc injectors. 65mm Throttle body, catch can, few other bits and pieces.

Asking $4000 for the motor with all bolt ons or make offers on parts seperatly.

Located penrith nsw

WILL TAKE OFFERS!
Link to comment
Share on other sites

Stripped motor down last night. Block destroyed, cylinder 2 rod through the side and piston damage. (unfortunate as was a forged setup) head untouched.

So only the top end complete rb25 twin turbo setup, with vgc head around 20k on head only.

Exhaust is a full stainless 1 piece.

Full setup with everything to convert Rb25 or rb30 to a twin turbo.

Including ARP stud kit

cometic head gasket

Braided turbo lines with all fittings

also have a Greddy electronic boost controller

Asking $2500 but too big too post located Penrith NSW.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



×
×
  • Create New...