Jump to content
SAU Community

Infringement Notice


GTS R33
 Share

Recommended Posts

So today I receive on my window from Mr Councilman a $170 fine. I was parked in a free council carpark.

Offence: Stopping on or near a pedestrian crossing (except at an intersection) - does this mean we can park on intersections with a crossing in Brisbane???

I will be checking if there is any warnings upon entering the carpark tomorrow about fines, rules, regulations about parking there. As I'm pretty sure fair trading says there must be adequate signage warning penalties.

Anyways do I stand a chance to fight it as i wasn't parked on a pedestrian crossing, it was a foot crossing (will also check if these are marked and signed) and I don't believe the paint on the road is a crossing of any sort as it leads nowhere.

I have seen fines issued in this carpark for parking in disability areas without a permit but never on these white lines, plus no fines on cars for parking in non carpark spaces and the middle of the carpark, or grassed areas.

Do these fines go to SPER as the back of the ticket says so, but it may be a ploy to make people pay the fine.

$170 is BS........ any help be great thanks!!!

Link to comment
Share on other sites

what's the definition of 'near'?

Usually 4-6 meters as judged by the parking "police"

So what it really means is whatever makes them the most cash to fill their quota baby!

Link to comment
Share on other sites

All good, spoke to a lawyer and sent in dispute for it to be withdrawn as it there is no signage at all which goes against Fair Trading Act and Australian Consumer Law.

Fingers Crossed

Link to comment
Share on other sites

I've got a similar complaint going through, no picture evidence, but they 'claim' the car was never moved....it actually was to run an errand and parked back in the same 4P spot. Waiting for BCC to supply the Tertiary degree for the parking officer pertaining to his expertise in vehicular forensics that led him to confirm the car had not moved. A chalk line doesn't cut it, I've still got a chalk line on the car 2 weeks later that looks fresh!

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hi ok thanks. So theres 2ball joint front 2 ball joint at the rear? Hi gets boy, soz and yes 2 ball joint for the front lower arm key adn right and rear is als 2 ball joint for left and right. 1 for each corner
    • added some VIRPIL flight controls. waiting on track IR and some virpil rudder pedals.     
    • Sorry for typo - it’s a VQ37 engine not VQ36.
    • On a 260RS? Don't they have Macpherson struts at the front like a Silvia? In which case, no, not 2 ball joints at the front. Only the lower one. (Unless when you say 2, you mean one on the left and one on the right, not 2 at each corner of the car). Skyline front suspension has a balljoint at the bottom of the upright (outer end of LCA) and a "kingpin" type upper bearing in the top of the upright. No upper balljoint either. The details of what happens above that differ between R32 and the R33/4. I think you should look at some pictures of the rear suspension (or just go take a wheel off your own car) and see what looks like it might or might not be a ball joint there. The situation at the rear is somewhat similar to the front. Lower ball joint and the motion at the top is taken care of by the bushes in the arms.
×
×
  • Create New...