Jump to content
SAU Community

Fs [Syd]: 7X Five-O Motorsport 1200Cc Side Feed Injectors + Stock Fuel Rail & Fuel Regulator (5X Used, 1X Near New, 1X New Spare)


Recommended Posts

Hallo,

Selling my 1200cc Five-O Motorsport Injectors from my car - they are currently on my car running E85. Happy to show you them in working form.

Now you're wondering why the flying cows I have 5x used, 1x near new & 1x new injector?

I bought the original 6x injectors used from a forum member here (not mentioning names) but turns out only 5 were working and 1x was dead - he clearly didn't tell me anything and we've lost contact. Anyhow - shit happens so I ended up ordering 2x brand new injectors (1x to use to complete the set and 1x as a spare).

Currently on my car running and probably making somewhere in the 300kW+ region, injector duty doesn't even go past 57% on full noise at 1.5 bar. Happy to take prospective buyer for a ride and demonstrate they are working and point out the idiosyncrasies - Pretty much these are highflow injectors, so kiss your economy goodbye however if you're building something you don't care about economy then it will run fine as you'll always be above 1.8ms pulse width.

Will come with:

  • 6x running 1200cc Five-O Motorsport Injectors (5x used 1x near new)
  • 1x brand new spare 1200cc Five-O Motorsport Injector
  • Factory fuel rail
  • Factory fuel pressure regulator

Contact: PM or Reply Here

Location: Canley Vale NSW (after hours) OR Milsons Point NSW (business hours)

Price: $500 for everything mentioned OR $430 minus 1x new injector

Will be happy to split the injectors away from the OEM rail, and OEM FPR for those SR20DET boys who are after them.

I've re priced everything after some consideration.

$480 for everything, 7x Injectors, FPR, Rail, Straight out/in affair

$400 for 6x Injectors, FPR, Rail, Straight out/in affair

$380 for 6x Injectors

$300 for 4x Injectors

$100 for 1x Injector (new)

$80 for 1x Injector (used)

$30 for Rail & FPR

I am firm, don't low ball me as I will just ignore you :)

Five-O Injectors

  • much flows
  • many ccs
  • stream like water fountain
  • many tickets with powers

Still in my car running E85 this week, after this week they will be removed so you won't be able to experience then running.

Sell them on Facebook man you'll get some hits there for sure. NSW skyline parts sales is pretty good

6x 1200cc Injectors, OEM rail and OEM FPR available

Still in car running, will remove this Sunday. Please come before if you would like to see them in action and enjoy the beautiful sound of my gate :)

1x new 1200cc SOLD

Thanks to the dimwit on Gumtree who wasted my time.

I've now removed the injectors for no apparent reason.

Unfortunately the future prospective buyer will be unable to see these injectors running

  • Like 1

I've order new pintle caps & seals for these as well.

I will fit matching pintle caps & install new seals on these injectors.

post-22311-0-86760800-1408924582_thumb.jpg

post-22311-0-16460700-1408924582_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...