Jump to content
SAU Community

Recommended Posts

For sale

1995 series 1.5 Nissan skyline R33

Car has 150,000kms

RB25DET engine has 110,000kms

Body is in great condition the boot has a flake of paint missing about the size of a 50c coin

Brand new genuine water pump fitted less than a month ago

Gates performance timing belt fitted at the same time

Genuine cam and crank seals replaced at the same time along with fresh coolant

Exhaust manifold was removed refaced at the same time

Extreme twin plate clutch less than 5000kms old

Custom engine mounts

Fake Greddy intake plenum polished

Bocsh 750cc injectors with custom inserts

Aftermarket fuel rail

Custom heat shields

4inch dump with v band fittings to cat the 3inch cat back exhaust

T04z size turbo not ball bearing

All custom oil and water lines

Koyo after market radiator with silicone hoses

Boost gauge and afr gauge

Vipec v44 ecu

Full fuel system 2.5L surge tank bocsh 044 -8 Teflon braided fuel feed line -6 Teflon braided return lines sard fuel regulator speedflow reusable fuel filter $2000 alone on fuel system setup no fuel smell in car or engine bay (not shown in pictures)

Front mount intercooler

Bov hidden in guard

Oil catch can (not shown in pictures)

R32 gtr front brakes and nuckles

18inch volt rims (from memory)

Tuned by anthony scali at Fabcar

460rwhp on 18psi pump fuel p100

Car is setup for E85 just need a 2nd 044 and a tune

Daily driver never had a issue with the police due to the stock look

Has 1 year of rego

That's all I can think of atm lol

Asking $13,000ono am willing to negotiate

Sorry no swaps

0408946815

Link to comment
https://www.sau.com.au/forums/topic/447070-1995-series-15-nissan-skyline-r33/
Share on other sites

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...