Jump to content
SAU Community

Recommended Posts

1) Are you missing a Sticker? I've had a few re-done; apparently suitable for high heat areas. And you can see one on the strut brace below. $20 including post.

Terry-34_zps9c2c234f.jpg

2) Nismo Strut Brace for the R32 GT-R (or R32). $140 plus your courier cost.

Terry-38_zps95d5b7cd.jpg

Terry-41_zpsa13a1b61.jpg

Terry-40_zps39205b3b.jpg

Terry-39_zps47861678.jpg

3) Steering Wheel (OEM) off a BNR32, but there is a 20c patch that has degraded at the very top. Example below. $285 plus post.

Aussie_Delivered_R32_GTR-1_zps198e8f37.j

4) Steering Wheel (Momo) off a BNR32. I'll have to take a look but I think the condition of this is also good. $200 plus post.

Terry-16_zps5b928668.jpg

5) ECUs off BNR34s. Still have Japanese tuning installed. The one on the left is from a V-Spec II. The one on the right is from an N1 and it's a Mine's (without the plaque). Suitable to install LINK etc. $75 each plus post.

Terry-42_zps042cc5bc.jpg

6) ECU off a BNR32 will be available shortly. $75 plus post.

7) Plenum off a BNR32. No links or gaskets. Available now with black paint half missing. $75 plus post.

8) BNR32 N1 (OEM) Front Bar (repaired). Two hairline cracks on the top 2 corners. $550 plus your courier arranged. Dstrbu still owes me the duct inserts.

Dstrbu-2_zpsb62231de.jpg

Dstrbu-4_zps5797fda5.jpg

Dstrbu-5_zpsc8c4e016.jpg

9) BNR32 Front Splitter/Dam (aftermarket I believe). Good condition. $150 plus your courier cost.

Dstrbu-1_zpsbd9f6299.jpg

Purchasing or enquiries available via PM.

Sorry guys, but I've had no luck in working out how to upload steering wheel pics from my XPeria Z1 into My Pictures.

Might have to try and take pics with the camera I usually use.

#2 Strut brace has been sold/taken.

#1 2x Nismo stickers sold.

4) Someone told me, "This is hideous", so I think I should reduce it to $190.

Terry-43_zpsb8c53aab.jpg

Yes, it's for a BNR32.

1) Another Nismo Sticker to be posted today.

1) going going

2) gone

3) due to be inspected

4) stuck > reduced to $180

5) stuck > but good value

6) enquiry only at this stage

7) going going

8) enquiry only at this stage

9) enquiry only at this stage

I'm in lower Blue Mtns Mike or 2 days a week in Sydney. Would you like to PM me with your specific request?

That wheel does look hideous haha, but adds fast and furious style points :P

Hehe... Well someone in Japan liked it Nathan, but he hasn't 'fessed up yet!

Well he can have it back for $170.

Only a couple of old style Nismo stickers left.

Plenum has gone.

I still have to get a pic of the BNR32 OEM steering wheel. Sorry about that.

  • Like 1

Dstrbu has promised over the past 3 wks to send them to me. Still waiting I'm afraid.

I'll PM you if/when they arrive. I've been patient. Thanks for being patient too.

Dstrbu has promised over the past 3 wks to send them to me. Still waiting I'm afraid.

I'll PM you if/when they arrive. I've been patient. Thanks for being patient too.

No worries. Let me know once you receive them. I'm assuming the inserts are genuine as well?

I really really hope so ay?

Last night - late last night - the OEM steering wheel sold. Many thanks and congrats!

Yes, the OEM steering wheel is now sold.

May I interest anyone here about this one though? Now $150.

Terry-43_zpsb8c53aab.jpg

In 28 days, I might have to give it away. How about as a fathers' day prezzie?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...