Jump to content
SAU Community

Gt30 .63 Or Gt35 .63?

hairdryer33

By hairdryer33,
in Engines & Forced Induction

 Share

Recommended Posts

Blackkers Experienced

Blackkers

Posted
Posted (edited)

38mm will be fine so long as you plan to run a decent amount of boost.

low boost + big turbo needs a bigger gate

GT35 size turbos don't really belong on a RB25 street car. a .63 rear on a GT35 turbo is a mismatch. Too much compressor, too little turbine.

GT30 with a 0.63 rear housing would be nice on the street but 0.82 will give you better top end and a few more usable top end revs.

You could always go GT30 with .63 rear and E85 + 22-24psi externally gated for around 330+ rwkw peak. usable boost would come on just before 4000 probably. That would be a mean street car

Edited by Blackkers
scotty nm35 Grand Master

scotty nm35

Posted
Posted

I agree, you can get away with a 38mm if the flow into it is optimised. Just welding it on a 90 won't cut it.

There is perhaps 200 rpm between the housings, there are also other housing options if you are going external gate. The Taiwanese stainless Tial knock offs are pretty good from my testing, and Kinugawa make some good ones in various sizes.

GTScotT Grand Master

GTScotT

Posted
Posted

The kando 10cm is 1/3 of the price and gives you an inbetween size (.7x)

I've used the kando 12cm (.89) on a GT30 core and so far have found zero drawbacks. I have also seen a few in action and results indicated they did exactly what the specs implied.

Far better value in total if you buy a garrett CHRA and kando housing separately.

Ben C34 Grand Master

Ben C34

Posted
Posted (edited)

I've got a brand new kando gt30 12cm for sale at the moment with Vband. You should use thar ;) 150 delivered.

Also have 3076 but with internal gate .82. Don't want to seperate it.

Edited by Ben C34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      5th November if you want to come out for a spin wakfield
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...