Jump to content
SAU Community

Recommended Posts

Nitto oil pump brand new only test fitted to car $1100

RB30 series 2 block standard bore $200

CP forged pistons 20 thou oversized with the largest pins available capable of 2000hp (also comes with

standard size pins as well) suit rb30 $1000 brand new

Npc twin plate clutch suit r33 gtst and r32 gtr, only done 400km $1400

R33 r34 rear toe control arms harden rubber hardrace brand, brand new $120

Russ toffbond metal jacket balancer excellent condition $500 suit rb25

Cometic mlsr head gasket suit rb26 and rb30 brand new $170

Rb26 valley cover, timing cover and timing backing plate $250

Rb crank collar brand new $70

Arp rb30 main studs brand new $200

Arp rb25 head studs brand new $200

RB underdrive pulley kit (power steering, alternator, water pump) brand new blue in colour $75

Rb2530 tensioner idler and belt set up only fitted to engine $130

Nismo engine mounts r33 hicas $150

Dynamat bulk extreme kit $170

R33 power window arm with motor $50

H1 hid kit Chinese brand, brand new $25

Located North Brisbane Caboolture area

More parts to come, can sms pics if genuinely interested

Thanks, Matt 0498 188 451

Link to comment
https://www.sau.com.au/forums/topic/449433-rb-performance-parts-north-brisbane/
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...