Jump to content
SAU Community

Recommended Posts

Got some parts i want to get rid of

1) 2x z32 afm. Very little use, bought brand new includes plugs. $150 each

2) R33 gtr extended sump with baffles and oil pick up. hi octane racing copy. Diff/sump from a series 3 gtr $800

3) Catch can. Custom catch can. designed to fit where washer bottle is. Has 2 inlets, breather outlet and a drain back as well. also has a clear tube to indicate oil level. $150

4) Apexi Power FC and controller, fitted to my R33 gtr. Tune that is saved on the computer is from JEM for a forged engine with 2530, cam gears. $650

5) Nitto oil pump. Removed from car due to finding a crack in the block and stripped the whole engine down. $500

6) RB26 Rocker covers. Spares left over $280

7) Custom Dump pipe. Lobster tail welds, very good flow. $150

8) Standard rb26 manifold and cross over pipe. $best offer

9) sard 700cc injectors. very little use maybe 10,000 kms if that. Direct drop in for rb26. $400

Call for more info

Going to post pics later tonight

Location is Newcastle (Mount Hutton), NSW

Andrew

0431088733

Had a lot of enquiries about the oil pump. Oil pump is in perfect condition. removed from engine due to low compression which was caused by a cracked block. No damage was done to block pistons, so no metal fragments have entered the pump even though they are tuff as nails, these pumps are. This go as well as the sump. Items have done less than 10,000kms

post-31739-0-91180500-1412761728_thumb.jpg

post-31739-0-95651000-1412761730_thumb.jpg

post-31739-0-40247100-1412761732_thumb.jpg

post-31739-0-51733900-1412761734_thumb.jpg

post-31739-0-24661700-1412761737_thumb.jpg

post-31739-0-74203000-1412761739_thumb.jpg

post-31739-0-36759900-1412761743_thumb.jpg

post-31739-0-24188300-1412761745_thumb.jpg

post-31739-0-06010900-1412761747_thumb.jpg

post-31739-0-70713900-1412761749_thumb.jpg

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 11 months later...

Sump sold to me. Excellent seller. Thanks for working with the international shipping. Highly recommended :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
    • From memory it wasn't too hard to simply see which wire ran where when you plug that in. Unfortunately also from memory the OEM sender does not use the same configuration 99.9% of gauges run. So in other words if you connect the signal wire that was running to the OEM gauge to your DEFI gauge you might find your oil reads at 200C or some other incorrect value. I remember having the same line of thought and then running new wires/senders to match the gauges I have. The pinout is available in the R34 workshop manual.
    • Does anyone on here know which wire on the GTT triple gauge pod harness is for the oil temp gauge? my sensor works fine but I upgraded the gauges to DEFI advance. And if I can simply piggyback off the oem oil temp wire to the Defi oil temp sensor wire that would make life so much easier. 
    • Even face her a wash now that’s it worth more than my house
    • This was what I was invisioning, or Pete cutting a beer can up and hose clamping it around the catch can! Ha ha ha
×
×
  • Create New...