Jump to content
SAU Community

Recommended Posts

just want to change back to stock front bumper with grill. i would like to swap my front bumper and grill with factory aero front bumper and grill (no matter is stock grill or aftermarket grill). I am in Sydney

i attached my gront bodykit as well, it is made of fiberglass with pearl white

http://autostyle-usa.com/m35stagia/GLA24121110001/

post-137368-0-79712000-1415067532_thumb.jpg

i want to swap with factory aero version like this with pearl white:

post-137368-0-65437000-1415067737_thumb.jpg

post-137368-0-89269900-1415067763_thumb.jpg

also accept stock front bumper plus money

Edited by YangLIU
Link to comment
https://www.sau.com.au/forums/topic/450354-m35-front-bodykit-swap/
Share on other sites

Good luck finding an aero front bumper in Australia.

I've been keeping an eye out for ages but have had no luck.

I've sent an email to Jesse Streeter about rough quotes on importing an aero front bumper so i'll let you know how i go.

Cheers

Good luck finding an aero front bumper in Australia.

I've been keeping an eye out for ages but have had no luck.

I've sent an email to Jesse Streeter about rough quotes on importing an aero front bumper so i'll let you know how i go.

Cheers

thanks mate. I just don't want COPS pay more attention on my car....

email back from Jesse Streeter was informative and straight to the point...

While you can pick up an aero front bumper for around the $60-$70 mark on Yahoo japan it can be anywhere from 45k to 70k yen to get it here (thats $450 to $700 shipping) through DHL.

Looks like for me i'll have to just keep looking :(

email back from Jesse Streeter was informative and straight to the point...

While you can pick up an aero front bumper for around the $60-$70 mark on Yahoo japan it can be anywhere from 45k to 70k yen to get it here (thats $450 to $700 shipping) through DHL.

Looks like for me i'll have to just keep looking :(

i would like to swap with stock bumper then.....really don't like current one.

Edited by YangLIU

I have a stock bar here, but the spare aero bar sold long ago.

Hi Scotty, you are in MEL, right? I am in Sydney. I think it is hard to swap with you. would you like sell it? PM me pls. which colour is it? do you have pic? :yes:

Hi Scotty, you are in MEL, right? I am in Sydney. I think it is hard to swap with you. would you like sell it? PM me pls. which colour is it? do you have pic? :yes:

It's blue. PM me, I will get you some pics when I get a chance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...